INSTALLATION
SA5 23
PROGRAMMING INSTRUCTIONS
With the system in Standby Mode.
Press , ,
The system is now in the Programming Mode
Navigating through the Programming
Mode Menus
The programmable system parameters are arranged by
groups in a series of menus within programming mode.
Each menu (and sub-menu) will contain all
programmable system parameters related to the
particular function.
Note: Some basic system parameters will be
contained within the system menu because
they related to a number of different
functions.
At each menu level, use the and buttons
to scroll through the available options.
Note: A menu item displayed in full capitals (e.g.
‘FULL ARM SETUP’) indicates that there is
another menu below that option. An option
displayed in lower case (e.g. ‘5.2 Entry Delay
Beep’
) indicates that this is a parameter setting
and no menu below, (although there may be
setting options).
Press to
a) select the displayed menu, or
b) change the displayed parameter setting, or
c) save the changed parameter setting and revert
to the previous level
Press to
a) exit to the previous menu level, or
b) revert to the previous level without saving a
changed parameter setting.
Note: After programming all required functions press
to leave Programming mode and return to
Standby.
7. PART ARM
9. LATCHKEY
8. TIME & DATE