628407
37
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
37
ATTENTION: if a line is excluded manually or it is being TESTED and the system is
COMPLETELY ARMED, the CHBUS reader will show the LED permanently green (all armed),
the keypad will display the zone/s excluded, even if the system is completely armed, and it will
display the words “CENTRALE PARTE INSERITA”. The event log will record the exclusion of the
zone/s and, if the system is completely armed with one excluded zone, the words “TOTAL
ACTIVATION” will be displayed.
- Output function test. The CE2N-416 control unit allows for the testing of all alarm outputs
on the card by activating each of them for about 3 seconds.
- Walk test. The control unit allows you to quickly and efficiently check the correct operation
of the sensors and modules.
Place the control unit in “line walk test” mode and activate the sensors that you want to
control. The keypad buzzer will generate a tone every time that the sensor is activated and the
activation will be recorded on the display.
Press the key no. 5 on the keypad to reset the alarm.
- Walk test Tamper. The control unit allows you to quickly and efficiently check the proper
operation of the anti-tampering sensors. Place the control unit in “walk test tamper” mode and
open the cases of the sensors that you want to control. The keypad buzzer will generate a
tone every time that the contact is activated and the activation will be recorded on the display.
Press the key no. 5 on the keypad to reset the alarm.
- Channel test. The control unit allows you to test the telephone alarm channel and the
correct dispatch of the vocal and/or digital signals to a specific number.
The call is sent without generating any effective alarm.
- DTMF reception test. The control unit can test the DTMF tone reception.
This test allows you to understand if the CE2N-416 control unit recognizes the DTMF tones
sent by a phone line from a telephone.
Select an active channel and an associated phone number; press V to call.
• Answeringtheincomingcall
• NOmessageisheard
• Pressthevariousdigits1,2,3,4,5,6,7,8,9,0,*,#fromthePHONEkeypad
• FromthedisplayoftheT8Nand/orT8N-Lightkeypads,thesameguresthatarepressed
on the phone will appear in the same sequence.
If the numbers don’t appear, modify the sensitivity of the telephone from the menu
Dialler control unit phone options reception gain
If the problem is not solved, check th–e connection and/or check the signal quality
of the incoming phone line.
8.7 Exclusions
With the CE2N-416 unit, it is possible to exclude some of the control unit’s functional elements,
such as lines or outputs for eliminating possible malfunctioning. The control unit ignores an
excluded component; therefore, it is possible to neither receive alarms from an excluded line nor
activate the excluded outputs.
37

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fracarro CE2N-416 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fracarro CE2N-416 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info