628407
46
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
46
Lines under Test
The CE2N-416 control unit allows you to test the lines without it activating the alarm outputs and the
tone signals from the keypads.
Under the test mode, the line is activated according to the programmed modes (for example, a
delayed line keeps the input/output time, even when it is being tested).
An alarm on lines being tested is signalled on the keypad display, on the red LED of the keypad and
on the key reader. The alarm is recorded in the historic log.
A line being tested generates a self-protection alarm (if the line is configured as single or double
balancing).
ATTENTION: if a line is excluded manually or it is being TESTED and the system is COMPLETELY
ARMED, the CHBUS reader will show the LED permanently green (all armed), the keypad will display
the zone/s excluded even if the system is completely armed and will display the words “CENTRALE
PARTE INSERITA”. The event log will record the zone exclusion and, if the system is completely
armed with one excluded zone, the words “TOTAL ACTIVATION” will be displayed.
Output function test
The CE2N-416 control unit allows the testing of all alarm outputs on the card by activating each of
them for about 3 seconds.
Walk test
The control unit allows you to quickly and efficiently check the correct operation of the sensors and
modules.
Place the control unit in “line walk test” mode and activate the sensors that you want to control.
The keypad buzzer will generate a tone every time the sensor is activated and the activation will be
recorded on the display.
Walk test Tamper
The control unit allows you to quickly and efficiently check the proper operation of the sensor self-
protections. Place the control unit in “walk test tamper” mode and open the cases of the sensors
that you want to control. The keypad buzzer will generate a tone every time that the contact is
activated and the activation will be recorded on the display.
Channel test
The control unit allows the test of the phone alarm channels and the correct dispatch of vocal and/
or digital messages to a specific number.
The call is sent without generating an effective alarm.
DTMF reception test
The control unit can test the reception of the DTMF tones.
This test allows you to understand if the CE2N-416 control unit recognizes the DTMF tones sent by
the phone line from a phone.
Choose an active channel and an associated phone number; press V to call.
• Answertheincomingcall
• NOmessagewillbeheard
• Pressthevariousdigits1,2,3,4,5,6,7,8,9,0,*,#fromthephonekeypad
• FromthedisplayoftheT8Nand/orT8N-Lightkeypads,thesamegureswhichare
pressed on the phone will appear in the same sequence.
If the numbers don’t appear, modify the sensitivity of the telephone in the menu
Dialler Control unit phone options reception gain
If the problem is not solved, check the connection and/or check the signal quality
of the incoming phone line.
46

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fracarro CE2N-416 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fracarro CE2N-416 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info