628407
34
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
34
- Acquisition of the reader
The reader doesn’t have a dip-switch for defining the address number. The acquisition
procedure is different from the procedure of the other modules and consists of simply
bringing a key to the reader when the control unit is in “Reader acquisition” mode.
Activate the “Acquisition” item from the readers’ menu:
The LED indications in the reader are as follows:
- all LEDs permanently ON: reader acquired
- all LEDs flashing rapidly: the reader is under acquisition but not yet stored by the control unit
When the LEDs are flashing, bring the CH10BG electronic key up to
the reader; when the acquisition is complete, the flashing LEDs will be
permanently ON.
Follow the same methods for all the other system readers
The acquisition is confirmed by a sound tone from the keypad, which also displays the number
of the acquired modules.
The number of the readers will be automatic and progressive and will follow the acquisition
number
Example: the first memorized reader will be the number 0; the second will be the number 1,
etc.
Attention: Do not install the CH-BUS module near the magnetic fields (for example,
transformers, dimmers, etc.) that may affect the operation. The minimum distance of
installation between the two CH-BUS modules is 20 cm.
ATTENTION: during this programming phase, the CH10BG key that was used to
acquire and codify the readers was NOT scanned and, therefore, at the moment, it
is not enabled for activations.
For the key memorization, refer to the procedure given in the user’s manual.
- Cancellation of the reader. From this menu item, you can cancel the readers which will
be removed from the system. After selecting the “Cancellation” function, select the
reader
- Name. each input module can be renamed for being identified; this function facilitates the
use for the end user.
8.2.3 Line modules
The module allows the expansion of 8 lines by means of a terminal board. The module is equipped
with electronic devices to manage fast alarms (vibration, wire ..) and another terminal for the
connection of the case tampering. Furthermore, it presents the terminals to power supply the
sensors.
Acquisition
Cancellation
Acquire
Readers
Names
Select reader
Enter a name
Modules
Line modules
Keypads
34

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fracarro CE2N-416 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fracarro CE2N-416 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info