733021
199
Verklein
Vergroot
Pagina terug
1/264
Pagina verder
197
EN
Source: Shimano
®
techdocs
Get thorough instructions from your
FLYER specialist dealer and practise
changing the wheels and tyres under
their supervision if you plan to repair
your own at tyres. The system must be
switched off and the battery must be re
-
moved before changing a tyre or wheel.
You need the following equipment to repair a tire
puncture:
Plastic tire lever
Patches
Rubber cement
Sandpaper
Open-ended spanner or wrench (for wheels
without quick release skewers)
Air pump
Spare tube
Your FLYER is equipped with a disc brake. This
way, you can remove the wheel without doing any
further preparation.
Please note: when tting the wheel, the disk must
be slotted between the brake linings of the brake
calliper and ultimately be centred without contact.
1. Removing the wheel
If your FLYER is equipped with a quick-release
lever or a thru axel, open them.
If your bike has hexagonal bolts, then loosen
them in anti-clockwise direction with a tting
ring spanner or box-end wrench.
You can then remove the front wheel according to
the steps listed above.
The following ap
-
plies for rear
wheels:
If your FLYER
uses a derailleur
gear system, change gear to the smallest
sprocket. In this position, the rear derailleur
poses the least hindrance in removing the
wheel.
If your FLYER is equipped with a quick-release
lever or a thru axel, open them.
If your FLYER has hex nuts, loosen these with
a suitable spanner anti-clockwise.
Pull the rear derailleur backwards somewhat.
Lift the bike slightly.
Lightly strike the wheel from above with the
palm of the hand.
Take the wheel out of the frame.
Types of valve on bicycle tubes
2. Removing the tyre and inner tube
Unscrew the valve cap, the fastening nut and
possibly the cap nut from the valve.
Release all of the remaining air from the inner
tube.
Insert the tyre lever opposite the valve on the
inside of the tyre.
Insert the second tyre lever approx. 10 cm from
the rst, between the rim and tyre. Lift the tyre
bead over the edge of the rim.
Repeat this lifting action around the wheel until
the entire tyre is free.
Remove the inner tube from the tyre.
3. Change the inner tube
Switch the inner tube for an intact one.
Tubular tires and tubeless tires must be
changed according to the tires and rims’
manufacturers instructions.
4. Reassembling the tyre and inner tube
Please avoid allowing foreign bodies in-
side the tyre. Ensure that the inner tube
does not have any folds and is not
squashed.
Ensure that the rim tape covers all spoke
nipples and does not have any damage.
Sclaverand
199

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Flyer Mountain - Bosch 2019 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Flyer Mountain - Bosch 2019 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 7,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info