679143
19
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
FBK 4 C2
14 
GB│IE│NI
Saw in sections
Trim long or thick branches before you make the final cut (see figure).
cb a
Working safely
Keep the appliance, the cutting mechanism and the chain guard

in
good condition to prevent injury.
If the appliance has been dropped, check for significant damage or
defects.
Observe the specified working angle max. 60°±10° to ensure safe
working (see figure).
Do not use the appliance while standing on a ladder or with unsteady
footing.
Do not be tempted into making a poorly considered cut.
You could endanger yourself and others.
Children should be supervised to ensure that they do not play with the
appliance.
Change your working position regularly. Using the appliance for a long
time can lead to vibration-related circulation disorders of the hands.
You can extend the usage duration by using appropriate gloves or by
taking regular breaks. Note that any personal predisposition to poor
blood circulation, low external temperatures or large gripping forces
can reduce the usage period.
Transport
Use the protective cases

/

for transporting the appliance.
To prevent injuries, ensure that the appliance cannot switch on during
transport (see figure).
Cleaning
Cleaning the engine unit
NOTE
Clean the appliance thoroughly after every use.
Always switch off the appliance before cleaning and then disconnect
the spark plug connector
.
Clean the appliance regularly with a damp cloth and a mild detergent.
Make sure that no water can penetrate into the interior of the appliance.
Cleaning the pole pruner
The pole pruner must be cleaned of sawdust at regular intervals.
Remove the sprocket cover
.
Remove the saw chain
from the blade and clean the guide rail .
Keep the saw chain
sharp and check the tension; check the oil level
and the oil supply.
Cleaning the hedge trimmer
Check the hedge trimmer for loose screws on the cutter bar
and
tighten these if necessary.
Remove stuck cuttings.
Maintain the cutter bar
using an oil spray or an oil can.
Cleaning the strimmer/cutting blade attachment
Remove stuck cuttings.
Keep the 3-section cutting blade
sharp to facilitate your work.
Maintenance
Replacing the strimmer/cutting filament
1.) The strimmer
must be removed as described in the section "Installing/
replacing the strimmer". Press the marking (see fig. 5a) and remove the
cover (see fig. 5b).
2.) Remove the spool bobbin
from the strimmer housing (see fig. 5c).
3.) Remove any remaining cutting filament.
4.) Double the new cutting filament and hook the loop that you have made
into the recess on the spool bobbin (see fig. 5d).
5.) Wind the filament tightly in an anticlockwise direction. The spool bobbin
separates the two halves of the cutting filament (see fig. 5d).
6.) Now take the cover in your hand and place the spool bobbin
in it.
Make sure that the filament holder of the spool bobbin lines up with the
filament guide on the cover.
7.) Now release the cutting filament from the spool bobbin
and guide
it through the metal eyes in the cover.
8.) Put the two halves of the housing back together so that they click into
place.
9.) Cut any excess filament back to about 13 cm. This reduces the load on
the engine when starting and warming up.
10.) Refit the strimmer (see section "Installing/replacing the strimmer").
C A B
max. 60°±10°
19

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Florabest-FBK-4-C2---IAN-296309

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Florabest FBK 4 C2 - IAN 296309 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Florabest FBK 4 C2 - IAN 296309 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,95 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Florabest FBK 4 C2 - IAN 296309

Florabest FBK 4 C2 - IAN 296309 Gebruiksaanwijzing - Nederlands, Deutsch, Français, Dansk - 78 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info