778615
16
Verklein
Vergroot
Pagina terug
1/111
Pagina verder
Wear suitable personal protective equip
ment: Ear protection, safety goggles, a dust
mask for work that generates dust.
CAUTION! Power tool can jam and cause
sudden kickback! Switch off immediately!
Firmly hold the power tool with both
hands, with one hand on the handle [1-11]
and the other hand on the auxiliary han
dle [1-7]. Make sure the speed is adjusted
correctly when screwdriving. Be prepared
for a high reaction torque, which may
cause the power tool to turn and lead to in
jury.
Do not use the power tool in the rain or in
damp surroundings. Moisture in the power
tool may cause a short circuit and fire.
Wait until the power tool has come to a
complete halt before placing it down. The
insertion tool can get caught and lead to a
loss of control of the power tool.
Avoid unintentional activation. Carrying
the electric power tool with your fingers on
the on/off switch can lead to accidents.
If you are not using the power tool, set the
rotational direction switch/safety lock
[1-10] to the centre position to lock the
on/off switch.
Do not use power supply units or third-
party battery packs to operate cordless
power tools. Do not use third-party charg
ers to charge the battery packs. The use of
accessories not expressly authorised by the
manufacturer can result in electric shocks
and/or serious accidents.
Only for AS/NZS: The tool shall always be
supplied via residual current device with a
rated residual current of 30 mA or less.
Warning of harmful light radiation.
Do not look into the light beam for long
periods. Do not direct the light beam to
wards other people or animals. Optical ra
diation can damage the eyes – [4].
Use a dust extractor when working with
dust.
Only use tools and accessories which have
been approved by Festool for this power
tool. The use of tools or accessories which
have not been approved may increase the
risk of injury and seriously unbalance the
machine. This may decrease the quality of
the working results and accelerate wear on
the power tool.
2.3 Safety instructions when using long
drill bits
Never operate at higher speed than the
maximum speed rating of the drill bit. At
higher speeds, the bit is likely to bend if al
lowed to rotate freely without contacting
the workpiece, resulting in personal injury.
Always start drilling at low speed and with
the bit tip in contact with the workpiece. At
higher speeds, the bit is likely to bend if al
lowed to rotate freely without contacting
the workpiece, resulting in personal injury.
Apply pressure only in direct line with the
bit and do not apply excessive pressure.
Bits can bend causing breakage or loss of
control, resulting in personal injury.
2.4 Emission levels
Sound pressure level LPA, sound power level
LWA and uncertainty K measured in accordance
with EN 62841:
LPA
[dB(A)]
LWA
[dB(A)]
K [dB]
Screwdriv
ing 73 84 5
Drilling 73 84 5
Impact
drilling 94 105 5
CAUTION
Noise generated when working
Risk of damage to hearing
Use ear protection.
Vibration emission level ah (vector sum for
three directions) and uncertainty K measured in
accordance with EN 62841:
ah [m/s2] K [m/s2]
Screwdriving < 2.5 1.5
Drilling 3 1.5
Impact drilling 14 1.5
The specified emission levels (vibration, noise)
are used to compare machines.
They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
English
16
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool TPC 18-4 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool TPC 18-4 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 3.53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info