497992
18
Verklein
Vergroot
Pagina terug
1/107
Pagina verder
18
C A R V E X
GB
To ensure constant air circulation, always keep
the cooling air openings in the motor housing
clean and free of blockages.
Check the guidance roller regularly for wear.
Regularly remove dust deposits from the
chip guard.
Regularly clean the base runner to prevent
scratches and cores on the surface.
10 Accessories
The order numbers of the accessories and
tools can be found in the Festool catalogue or
on the Internet under "www.festool.com".
10.1 Saw blades, other accessories
In order to saw different materials quickly and
cleanly, Festool offers saw blades for all appli-
cations that are specially designed for your
Festool jigsaw.
10.2 Sawing with special base runners
The special base runners protect high-quality
surfaces against scratches and scores.
X
Press in the base runner at position
[6-1]
.
X
At the same time, push the base runner
forwards.
X
Mount another base runner and push it to
the rear until it engages.
10.3 Sawing with the angle table
The angle table WT-PS 400 is used for cutting
pipes or interior and exterior angles up to 45°.
Dust extraction is not possible when
sawing with the angle table!
Installing the angle table
X
Remove the saw base
[1-11]
, (see chap-
ter
7.4
).
X
Position the angle table against the saw
base support.
X
Close the lever
[1-9]
.
Ensure that the angle table is firmly seated in
the guide.
Setting the angle
X
Turn the adjusting wheel
[7-1]
to select
the required angle.
You can select the angles -45°, 0° and +45°
on the scale
[7-2]
.
L
For 90° cuts, we recommend setting the
angle table to a small negative angle to
guarantee smooth operation.
10.4 Sawing with the adaptation table
The adaptation table ADT-PS 400 is used for
attaching your jigsaw to the Festool guide rail,
the circle cutter KS-PS 400 and the CMS mod-
ular system.
With guide rail and circle cutter:
do
not exceed max. material thickness of
20 mm and always use cross-set saw
blades (FSG).
Installing the adaptation table
X
Remove the saw table
[1-11]
, (see chap-
ter
7.4
).
X
Mount the adaptation table
[8-1]
on the
saw table support.
X
Close the change lever
[1-9]
.
Ensure that the adaptation table is firmly seat-
ed in the guide.
L
Use the extractor connector
[1-8]
also
with the adaptation table.
Adaptation to the guide rail FS 2
The Festool guide system FS 2 (Fig.
[9]
)
makes it much easier to manufacture straight
precision cuts.
X
Place the jigsaw with attached adaptation
table
[8-1]
on the guide rail.
Adaptation to the circle cutter
The circle cutter can be used to create circular
cuts with a diameter between
120
and
3000
mm. The circle cutter can be installed from
both sides on the adaptation table.
X
Place the jigsaw with attached adaptation
table on the adapter
[10-1]
on the circle
cutter.
X
Insert the centring mandrel
[10-2]
in the
hole
[10-4]
on the circle cutter aligned
with the saw blade.
X
Clamp the measuring tape to the circle cut-
ter using the rotary knob
[10-5]
.
Recommended when using the circle cutter:
WARNING
Sawing cutting depths
Risk of injury
X
Select the saw blade length and cutting
depth so that the saw blade remains
plunged in the workpiece.
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool PS CARVEX 420 EBQ bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool PS CARVEX 420 EBQ in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 7,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info