778626
18
Verklein
Vergroot
Pagina terug
1/108
Pagina verder
11 Accessories
WARNING
Risk of injury
Remove the battery pack from the power
tool before performing any work on the
power tool.
Always use original Festool tools and accesso
ries. Using low-quality tools or accessories
from other manufacturers may increase the
risk of injury and seriously unbalance the ma
chine, decreasing the quality of the working re
sults and accelerating power tool wear.
Refer to the Festool catalogue for the order
numbers of accessories and tools or find them
online at www.festool.co.uk.
11.1 Mounting the adapter [5]
A depth stop, dust extraction device and posi
tioning aid can be mounted on the adapter. Us
ing the detent button [5-1], these can be offset
in 30° increments in line with the tool.
11.2 Dust extraction device [6]
Mount the adapter [5].
Attach the dust extraction device.
Connect the suction hose.
11.3 Depth stop [7+8]
Mount the adapter [5].
Attach the depth stop – [7a] or [7b].
Engage the adjusting lever [8-1] to set the
cutting depth.
Select the correct depth stop for the tool
and replace if necessary:
Round tools Sliding shoe [8-2]
Cutting blade Rotary depth
stop [8-3]
11.4 Positioning aid [9+10+11+12]
WARNING
Sharp tools
Pinching and cutting injuries
Always rest your fingers on the defined
gripping surfaces [11-3].
Always use the saw blades indicated in Fig.
[11]. Do not use short saw blades.
WARNING
Risk of accident, electric shock
If the tool comes into contact with live ca
bles, an electric current may be diverted
through metal components in the tool and
result in electric shock.
Hold the power tool by the insulated grip
ping surfaces when performing work that
may pose a risk of cutting into hidden pow
er cables.
Using the positioning aid
Mount the adapter [5].
Attach the positioning aid – [9a] or [9b].
First place the application tool on the saw
blade guide [10-1], then push it into the
holder [10-2] until it engages. This is nec
essary to ensure that the application tool is
positioned correctly on the saw blade guide.
Adjust the cutting depth [11-1].
Always tighten the cutting depth adjust
ment [11-1].
Readjusting the saw blade guide
First check to ensure that the application tool
has been inserted in the correct order (see fig
ure [10]). If the saw blade is still not positioned
on the saw blade guide, take the following
steps:
Set the cutting depth [11-1] to the maxi
mum depth. Tighten the cutting depth ad
justment [11-1].
Loosen the screw [12-1] on the saw blade
guide [12-2].
Move the saw blade guide to the saw blade.
Tighten the screw [12-1] on the saw blade
guide.
12 Service and maintenance
WARNING
Risk of injury, electric shock
Always remove the battery pack from the
power tool before performing any mainte
nance or service work.
All maintenance and repair work which re
quires the motor housing to be opened
should always be carried out by an author
ised service workshop.
English
18
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool OSC 18 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool OSC 18 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 12.69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info