778626
15
Verklein
Vergroot
Pagina terug
1/108
Pagina verder
Wear suitable personal protective equip
ment: Ear protection, protective goggles,
dust mask for work that generates dust,
protective gloves for working with rough
materials and for changing tools.
Grip the electric power tool securely so
that your body never comes into contact
with the operating tool, especially when
working with saw blades or cutting tools
directed towards the grip area, for exam
ple. Contact with sharp blades or edges
can result in injuries.
After machining materials that contain
gypsum: Clean the vents of the power tool
and on/off switch using dry, oil-free com
pressed air. Otherwise, gypsum dust de
posits may build up inside the power tool's
housing and on the on/off switch and hard
en when exposed to humidity. This may im
pair the switching mechanism
Wait until the power tool has come to a
complete halt before placing it down. The
insertion tool can get caught and lead to a
loss of control of the power tool.
Do not use power supply units or third-
party battery packs to operate cordless
power tools. Do not use third-party charg
ers to charge the battery packs. The use of
accessories not expressly authorised by the
manufacturer can result in electric shocks
and/or serious accidents.
Do not use the power tool in the rain or in
damp surroundings. Moisture in the power
tool may cause a short circuit and fire.
2.3 Metal processing
When processing metal, the following
measures must be taken for safety reasons:
Connect the machine to a suitable dust ex
tractor.
Regularly blow out the motor housing of
the machine to remove dust deposits.
Wear protective goggles.
2.4 Emission levels
The levels determined in accordance with
EN 62841 are typically:
Sound pressure level LPA = 83 dB(A)
Sound power level LWA = 93 dB(A)
Peak sound pressure level LpCpeak = 97 dB(C)
Uncertainty K = 3 dB
CAUTION
Noise generated when working
Risk of damage to hearing
Use ear protection.
Vibration emission level ah (vector sum for
three directions) and uncertainty K measured in
accordance with EN 62841:
Einstufung der Festool Einsatzwerkzeuge nach
Vibrationsklassen. Die dem jeweiligen Einsatz
werkzeug zugeordnete Vibrationsklasse VK en
tnehmen Sie der Tabelle auf Abbildung [13]
The specified emission levels (vibration, noise)
are used to compare machines.
They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
They represent the primary applications of
the power tool.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
The actual load during the entire operating
cycle must be evaluated.
Depending on the actual load, suitable pro
tective measures must be defined in order
to protect the operator.
3 Intended use
Hand-held cordless oscillator designed for
Sawing wood, plastic, glass-fibre rein
forced plastic (GFRP), plasterboard and
sawing sheet metal (max. 1 mm),
Cutting out tile joints and window putty,
Scraping away carpet residues and cutting
elastic sealant,
in a weatherproof environment,
with the tools and accessories offered by
Festool.
intended for use with BP Festool battery
packs of the same voltage class.
Not suitable for removing windows from pas
senger cars, lorries and buses or renovating
concrete joints.
The user is liable for improper or non-in
tended use.
English
15
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool OSC 18 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool OSC 18 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 12.69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info