778630
24
Verklein
Vergroot
Pagina terug
1/142
Pagina verder
8.2 Changing the diamond cutting disc [4]
WARNING
Risk of accident, risk of injury
Only use the clamping nut provided. Do not
use quick-action clamping nuts.
Only use diamond cutting discs that are
recommended by the manufacturer and
flanges that come supplied with the sand
er.
Do not use cutting discs that contain bind
ers.
CAUTION
Risk of injury from hot and sharp tool
Do not use any vibrating, blunt or defective
sanding tools.
Do not use sanding tools that have been
exposed to extreme humidity, moisture or
high temperatures prior to installation.
Wear protective gloves.
Remove the battery pack from the power
tool.
Place the flange [4-4] with the ridge on the
spindle.
Ensure that the centring ridge of the flange
fits exactly into the opening in the disc and
that the form-fit connection between the
power tool/spindle and flange matches.
Ensure that the diameter of the power tool
spindle matches the hole in the sanding
tool.
Adhere to the stipulated rotational direction
of the sanding tool (arrow on the sanding
tool = arrow on the tool housing).
Place the diamond cutting disc [4-3] on the
spindle and flange.
Position the clamping nut [4-2] on the dia
mond cutting disc, press the spindle lock
and firmly tighten the clamping nut using
the face wrench [4-1].
Check that the sanding tool is securely at
tached and fitted to the power tool.
Before switching on the power tool,
check to ensure that the cutting disc and
the moving part of the dust extraction at
tachment [1-6] can move freely.
Let new discs run for around one minute
with no load as a test.
Removal is performed in reverse sequence to
assembly.
8.3 Plate [5]
The plate [5-1] reduces the risk of damaging
the workpiece surfaces.
Slide the plate onto the front edge of the
dust extraction attachment's guide table
and lock into place.
8.4 Dust extraction
WARNING
Heath hazard posed by dust
Always work with an extractor.
Comply with national regulations.
A Festool mobile dust extractor with a suction
hose diameter of 27 mm or 36 mm (36 mm rec
ommended due to the reduced risk of clogging)
can be connected to the extractor connec
tor [1-1].
The adapter on a suction hose with a diameter
of 27 mm is inserted into the angle adapter .
The adapter on a suction hose with a diameter
of 36 mm is attached to the angle adapter .
Recommendation: Use an antistatic extractor
hose. This helps reduce the electric charge.
9 Working with the electric
power tool
WARNING
Risk of injury
Only guide the power tool into the material
when it is switched on (running).
Always secure the workpiece in such a
manner that it cannot move.
Keep your hands away from the rotating
sanding tools.
WARNING
Risk of injury from the fragile sanding tool
Ensure that the sanding tool's expiry date
has not been exceeded.
WARNING
Risk of injury due to moving workpiece
Ensure that the workpiece is secure.
WARNING
Risk of injury from overhead work
Always wear safety glasses for overhead
work.
Wear a P2 respiratory mask.
English
24
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool DSC-AGC 18 FH bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool DSC-AGC 18 FH in de taal/talen: Alle talen als bijlage per email.

De handleiding is 3.55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info