499167
19
Verklein
Vergroot
Pagina terug
1/122
Pagina verder
CTH
19
GB
7.3 Connecting pneumatic tools
If the compressed air module
[1-3]
(496141) is installed, the automatic switch-
on function of the mobile dust extractor also
works in combination with pneumatic tools.
We also recommend installing the VE service
unit (495886). The service unit filters and lu-
bricates the compressed air and enables an
adjustment of the air pressure. An IAS
adapter (454757) is available to connect Fes-
tool pneumatic tools to the IAS system.
The operating pressure of the tool must be
6 bar for the automatic switch-on unit to
function correctly.
7.4 Adjusting the suction power
You can use the suction power adjuster
[1-
9]
to adapt the machine suction power to
different applications.
7.5 Applying the brake
Folding out the black brake lever
[1-15]
pre-
vents the mobile dust extractor from rolling.
To achieve this, lift the front end of the mo-
bile dust extractor slightly and push the
black brake lever downwards until it latches
into place. Push the green lever
[1-14]
again to release.
7.6 Temperature cut-out
To prevent overheating, a temperature cut-
out switches the mobile dust extractor off
when it reaches a critical temperature.
X
Switch off the mobile dust extractor and
allow to cool for about 5 minutes.
L
If the mobile dust extractor will not switch
on again, please contact a Festool service
workshop.
7.7 Changing the filter bag
(SC-FIS-
CT26/48)
Removing the filter bag [4]
X
Open the locking clips
[2-2]
and remove
the top section of the machine
[2-1]
.
X
Remove the filter bag.
X
Dispose of the used filter bag in accor-
dance with statutory regulations.
X
Clean the dust container
[2-3]
.
Inserting the filter bag [5]
X
Insert a new filter bag(SC-FIS-CT26/48)
in the inlet port of the dust container and
interlock it.
Important:
be aware that
the locking engages.
L
Make sure that the filter bag is not
pinched between the top and bottom sec-
tions.
X
Replace the top section
[2-1]
and close
the locking clips
[2-2]
.
7.8 Changing the safety filter bag
(FIS-CTH 26/48)
Always use the safety filter bag for ab-
sorbing Class H dust.
Removing the safety filter bag [6]
X
Close off the extractor opening
[1-2]
us-
ing the sealing plug
[1-1]
.
X
Open the locking clips
[2-2]
and remove
the top section of the machine
[2-1]
.
X
Knock the material of the plastic bag up-
wards and close the lateral openings with
the adhesive tabs.
X
Close the plastic bag around the filter bag
using the cable ties supplied.
X
Remove the safety filter bag
X
Dispose of the used safety filter bag in ac-
cordance with statutory regulations.
X
Clean the dust container
[2-3]
.
Inserting the safety filter bag [7]
X
Insert a new safety filter bag (FIS-CTH
26/48) on the inlet nozzle of the container
and lock in position.
Important:
Ensure
the lock is snapped in.
X
Place the plastic bag over the edge of the
container. The lateral openings on the
safety filter bag must be positioned inside
the dirt trap.
Ensure the contacts are
[10-2]
free.
L
Make sure that the filter bag is not
pinched between the top and bottom
sections.
X
Replace the top section
[2-1]
and close
the locking clips
[2-2]
.
WARNING
Risk of injury
X
Make sure that the pneumatic tool is
switched off before connecting or discon-
necting.
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool CTH 48 E a bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool CTH 48 E a in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 2,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info