52 Ferm
MAINTENANCE
Make sure that the machine is not live when
carrying out maintenance work on the motor.
The Ferm machines have been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon
proper machine care and regular cleaning.
Cleaning
Regularly clean the machine housing with a soft cloth,
preferably after each use. Keep the ventilation slots free
from dust and dirt.
If the dirt does not come off use a soft cloth moistened
with soapy water. Never use solvents such as petrol,
alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Lubrication
The machine requires no additional lubrication.
Faults
Should a fault occur, e.g. after wear of a part, please
contact your local Ferm dealer.
In the back of this manual you find an exploded view
showing the parts that can be ordered.
ENVIRONMENT
In order to prevent the machine from damage during
transport, it is delivered in a sturdy packaging. Most of
the packaging materials can be recycled. Take these
materials to the appropriate recycling locations.
Take your unwanted machines to your local Ferm-
dealer. Here they will be disposed of in an
environmentally safe way.
GUARANTEE
The guarantee conditions can be found on the separately
enclosed guarantee card.
Wear of the cutter is not covered by the guarantee.
We declare under our sole responsability that this
product is in conformity with the following
standards or standardized documents
EN60745-1, EN60745-2-17,
EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3
in accordance with the regulations.
98/37EEC, 73/23EEC
89/336/EEC
from 01-05-2004
ZWOLLE NL
W. Kamphof
Quality department
OBERFRÄSE
DIE NUMMERN IM NACHFOLGENDEN TEXT
KORRESPONDIEREN MIT DEN ABBILDUNGEN
AUF SEITE 2
TECHNISCHE DATEN
INHALT DER VERPACKUNG
1 Oberfräse
1 Fräser (Fräsbit)
1 Parallelführung
1 Schablonenführung
2 Schrauben
2 Muttern
1 Adapter für Staubabsaugung
1 Staubrohr
1 Gabelschlüssel
16 mm Spannpatrone
18 mm Spannpatrone
1 Betriebsanleitung
1 Sicherheitsheft
1 Garantiekarte
Überprüfen Sie die Maschine, lose Teile und Zubehör auf
Transportschäden.
PRODUKTINFORMATION
Fig. A
Die Oberfräse FBF-1050E eignet sich für professionelle
Fräsarbeiten in Holz, holzähnlichen Materialien und
Kunststoffen.
1 Ein-Aus-Schalter
2 Griff
3 Frässohle
4 Klemmschraube für Parallelführung
5 Aufnahme für Parallelführung
6 Spannfuttermutter
7 Spindelverriegelung
8 Revolver-Tiefenanschlag
9 Klemmschraube Tiefenanschlag
10 Tiefenanschlag
11 Klemmhebel
12 Verteilung der Frästiefe
13 Verstellrad elektronische Drehzahlregelung
14 Stellknopf Höhe
15 Adapter für Staubabsaugung
16 Auslassöffnung für Staub
Spannung | 230 V~
Frequenz | 50 Hz
Aufgenommene Leistung | 1050 W
Drehzahl unbelastet/min | 9000-30000
Max. Fräserdurchmesser | 30 mm
Frästiefe | 30 mm
Spannfutter | 6 & 8 mm
Gewicht | 3.28 kg
Lpa (Schalldruck) | 89.0 dB(A)
Lwa (Schalleistung) | 102.0 dB(A)
Vibrationswert | 4.3 m/s
2
CE
ı
DECLARATION OF CONFORMITY
(
UK
)
Ferm 5
