78 Ferm
RADIAL TILE CUTTER
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
TECNICAL SPECIFICATIONS
PRODUCT INFORMATION
Fig.4
1 Scale plate
2 Tighten knob
3 Indicater
4 Grip handle
5 Guide rall
6 Fixing bolt / mitre gauge
7 Knob / mitre gauge
8 Mitre fence
9 Blade guard
10 Back Fence ( central end with 45° cutting)
11 Back Fence (double end planed)
12 Locking knob (for stop head moving)
FUNCTIONS AND CHARACTERISTIC
Blade can tilt to any angle between 0° and 45°.
The mitre gauge on the table can turn to any angle.
In the process of cutting, the pump can provide blade
with water. This can increase the life of the blade and also
decrease dust.
Blade moves along the guide rail in straigh and keeps the
cut stable
SAFETY INSTRUCTIONS
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
1. Keep work area clean.
Cluttered areas and benches invite injuries.
2. Consider work area environment.
Don’t expose power tools to rain. Don’t use power
tools in damp or wet locations. Keep work area well
lit. Don’t use power tools in presence of flammable
liquids or gases.
3. Guard against electric shock.
Prevent body contact with grounded surfaces (e.g.
pipes, radiators, ranges refrigerators).
4. Keep children away.
Do not let visitors contact tool or extension cord.
All visitors should be kept away from work area.
5. Store idle tools.
When not is use, tools should be stored in dry, high,
or locked-up place, out of reach of children.
6. Don’t force tool.
It will do the job better and safer at the rate for which
it was intended.
7. Use right tool.
Don’t force small tools or attachments to do the job
of heavy duty tool. Don’t use tools for purposes not
intended:for exam-ple, don’t use a circular saw for
cutting tree limbs or logs.
8. Dress properly.
Do not wear loose clothing or jewelry. They can be
caught in moving parts. Rubber gloves and nonskid
footwear are recommended when working
outdoors. Wear protective hair covering to contain
long hair.
9. Use safety glasses.
Also use face or dust mask if cutting operation is
dusty.
10.Don’t abuse cord.
Never carry tool by cord or yank it to disconnect it
from receptacle. Keep cord from heat, oil and sharp
edges.
11.Secure work.
Use clamps or a vise to hold work. It’s safer than
using your hand and it frees both hands to operate
tool.
12.Don’t overreach.
Keep proper footing and balance at all times.
Motor | 230 V~, 50 Hz
Power | 550 W
No load speed | 2950/ min
Blade speed | 28 m/s
Blade size | Ø 180 mm,
| Ø25.4mm Bore
Max. depth of 90° cut | 25 mm
Max. depth of 45° cut | 15 mm
Max. cutting length | 330 mm
Netto weight | 21.8 kg
Lpa (Sound pressure level) | 59.4 dB(A)
Lwa (Sound power level) | 72.4 dB(A)
Vibration | 2.8 m/s
2
Ferm 3
STAND SPARE PARTS LIST
REF. NR. DESCRIPTION Q’TY
1 TOP STIFFENER L / R SIDE 2
2 M5 NYLON NUT 12
3 M5 HEX BOLT 12
4 FRAME CLIP 4
5 FRAME BRACKET 4
6 TOP STIFFENER (FRONT / REAR) 2
7 COACH BOLT M8 16
8Ø 8 WASHER 16
9 M5 MYLON NUT 16
10 LEG NO.1 2
11 LEG 2
12 FEET PAD 4
13 BOTTOM STIFFENER L / R SIDE 2
14 BOTTOM STIFFENER (FRONT / REAR) 2
15 M6 HEX-HEAD BOLT 4
16 Ø 6 WASHER 8
17 M6 NYLON NUT 4
18 M5 NUT 2
19 RING HOOK 1
20 FRAME TUBA 1
