52 Ferm
APPLICATIONS
(Only useful for subjoined applications)
1. Sanding wooden surfaces.
2. Removing rust and sanding metal surfaces.
3. Polishing.
GRIPS
The use of your sanding machine is made easier because
of the two grips one on the front side and one on the
back side. Through that you can hold the machine with
two hands, so that you have a better control of the
machine and besides you do not risk becoming in touch
with the moving parts. Hold your sanding machine
always with your both hands.
TROUBLESHOOTING
In case the sanding machine does not work well, we give
you some possible causes and solutions.
1. The electromotor gets hot.
The cool ventilation slots in the motor are stopped
up with dirt
-clean the cool ventilation slots
The motor is defect.
-Have your sanding machine repaired or checked by
your local Ferm dealer.
2. The connected machine does not work.
Interruption in the mains connection.
-Check mains connection for fracture;
-Have your sanding machine repaired/checked by
your local Ferm dealer.
3. The dust is not absorbed:
This can be caused by a stopped up dust extraction.
-Clean your dust collection opening.
Repairing of electric appliances may be carried out
only by experts.
MAINTENANCE
Make sure that the machine is not live when
carrying out maintenance work on the motor.
The Ferm machines have been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon
proper machine care and regular cleaning.
Cleaning
Keep the ventilation slots of the machine clean to
prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth,
preferably after each use. Keep the ventilation slots free
from dust and dirt.
If the dirt does not come off use a soft cloth moistened
with soapy water. Never use solvents such as petrol,
alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Lubrication
The machine requires no additional lubrication.
Faults
Should a fault occur, e.g. after wear of a part, please
contact your local Ferm dealer.
In the back of this manual you find an exploded view
showing the parts that can be ordered.
ENVIRONMENT
In order to prevent the machine from damage during
transport, it is delivered in a sturdy packaging. Most of
the packaging materials can be recycled. Take these
materials to the appropriate recycling locations.
Take your unwanted machines to your local Ferm
dealer. Here they will be disposed of in an
environmentally safe way.
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
GUARANTEE
The guarantee conditions can be found on the separately
enclosed guarantee card.
We declare under our sole responsibility that this
product is in conformity with the following standards or
standardized documents
EN50144-1, EN50144-2-4,
EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3
in accordance with the regulations.
98/37/EEC
73/23/EEC
89/336/EEC
from 01-01-2003
ZWOLLE NL
W. Kamphof
Quality department
CE
ı
DECLARATION OF CONFORMITY (UK)
Ferm 5
