ClEl
■
KONFORMITETSERKLÆRING (DK)
Vi erklærer at under almindeligt ansvar, at dette
produkt er i overenstemmelse med følgende
normer eller normative dokumenter
EN50144-1, EN50144-2-4,
EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3
i henhold til bestemmelserne i direktiverne:
98/37EEC,
73/23EEC,
89/336EEC
frà 01-09-2000
GENEMUIDEN NL
G.M. Ensing
Quality department
38 Ferm
TECHNICAL SPECIFICATIONS
Voltage 230 V
Frequency 50 Hz
Power consumption 240 W
No load speed 6000-8500/min
Weight 1.62 kg
Lpa(noise burden) 77.4 dB(A)
Lwa(noise capacity) 90.4 dB(A)
Vibration value 3.69 m/s2
Electrical safety
Always check that the mains voltage corres-
ponds to the value on the model plate.
The machine has double insulation in accordan-
ce with EN 50144; an earth wire is therefore not
required..
When replacing leads or plugs
Always immediately dispose of old leads or plugs as soon
as they have been replaced by new ones. It is dangerous
to put a loose plug into a socket.
When using extension cables
Only use an approved extension cable which is suitable
for the voltage of the machine. The conductors must have
a surface area of at least 1.5 mm2. If the extension cable is
on a reel, unroll it completely.
CONTENTS OF THE PACKAGING
The packaging contains:
1 Sander
1 Triangular sanding foot
1 Rotating sanding foot
2 Detail sanding feet
1 Scraper
1 Adapter
1 Allenkey
3 pieces of sandpaper for the triangular sanding foot
3 pieces of sandpaper for the rotating sanding foot
2 pieces of sandpaper for the detail sanding feet
1 case
1 Instructions
1 safety section
1 warranty card
Check the machine and accessories for transport dama-
ge.
PRODUCTINFORMATION:
Fig. A.
The Ferm FCS-180 Combisander is a versatile machine
with which you can easily sand large surfaces, corners
and even round or small parts. The Combisander can be
used to sand wooden and metal surfaces.
In addition the machine is delivered with a scraper which
can be used to easily remove loose paint layers and re-
mains of glue from the area to be sanded.
Ferm 3
AVAILABLE SPARE PARTS FOR FERM FCS-180
REF.NR. DESCRIPTION FERM NR.
007 SWITCH 301120
014 PINION GEAR 301121
017 ROTOR 301122
019 STATOR 301123
021 PCB 301124
022 TILL 034 DRIVE MECHANISM COMPLETE 301125
025 SPINDLE GEAR 301126
037 ELASTIC PILLAR 301127
038 ELASTIC PILLAR 301128
044 DELTA SANDING PAD 301129
045 ROTARY SANDING PAD 301130
046 SCRAPER 301131
048 BASE FOR SCRAPER AND CONTOUR SANDER 301132
051 TILL 054 CARBON BRUSH SET COMPLETE 301133
055 U-SHAPE CONTOUR SANDER 301134
056 Y--SHAPE CONTOUR SANDER 301135
