798918
12
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
12
EN
2. Sawing on a sawhorse:
Hold the electric chainsaw steady with both
hands, keeping the saw in front of you while
sawing. Once the saw is through the wood, guide
the machine passed you on the right (1). Hold
your left arm as straight as you can (2). Watch out
for the falling trunk. Position yourself to prevent
any danger from the separated trunk. Watch your
feet. The trunk may cause injuries when falling.
Keep your balance (3).
Limbing
Limbing is the designation for the sawing off of
branches and boughs from a felled tree.
Many accidents occur during the removal of
branches. Never cut tree limbs when you are
standing on the log. Keep the spring-back area in
mind if branches are under tension.
Do not remove support branches until after the
sawing off.
Branches under tension must be sawed from
below to above, in order to prevent jamming of
the chainsaw.
When working on thicker branches, use the same
technique as when you are sawing up a felled trunk.
Work to the left of the log and as near as
possible to the electric chainsaw. As far as
possible, the weight of the saw should rest on
the log.
Change position to saw off branches on the
other side of the trunk.
Branches sticking out are cut off separately.
5. MAINTENANCE
Before cleaning and maintenance, always
switch off the machine and remove the
battery pack from the machine.
Only use original spare parts. Allow the device to
cool off before undertaking any maintenance or
cleaning work. There is a danger of burns!
Use cut-protection gloves when handling
the chain or the chain bar. Risk of cuts!
Cleaning
Clean the machine thoroughly after every use.
In this way, you extend the life of the machine
and avoid accidents.
Keep the gripping handles free of petrol, oil
or grease. Clean the gripping handles, where
appropriate, with a moist cloth soaked in soap.
Use no solvents or petrol for cleaning!
Clean the saw chain after every use. Use a
paint brush or wipe for that. Do not use any
liquids to clean the chain. After cleaning, oil the
chain lightly with chain oil.
Clean the ventilation slots and the surfaces of
the machine with a paint brush, whisk or dry
cloth. Do not use any liquids for cleaning.
Saw chain oiling
Clean and oil the chain regularly. This keeps the
chain sharp and achieves optimum machine
performance. Damage due to insufficient
maintenance of the saw chain will invalidate the
warranty.
Remove the battery and use cut-
resistant gloves when working with the
chain or with the blade bar.
The blade bar and chain must never be
operated without oil. If the cordless
pruner saw is used with too little oil, the
cutting performance and lifespan of the
saw chain will decrease as the chain will
become blunt more quickly. You can
identify when there is too little oil if
smoke develops or the blade bar
changes colour.
Switch off the device and remove the
battery before carrying out any
maintenance work.
Oil the chain after cleaning, after 10 hours of
use or at least once a week, whichever comes
first.
Before oiling, the blade bar, especially the
teeth of the blade bar, must be thoroughly
cleaned. Use a hand brush and a dry cloth for
this purpose.
Oil the individual chain links using an oil
syringe with a needle tip (available from
specialist dealers). Apply individual drops of
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ferm CSM1051 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ferm CSM1051 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 6.87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info