Ferm 91
CE KONFORMITETSERKLÆRING (DK)
Vi erklærer herved, udelukkende på eget ansvar, at dette
FDCD-1200NK
opfylder følgende standarder eller standardiserede dokumenter:
EN60745-1, EN60745-2-1, EN60745-2-2, EN55014-1, EN55014-2,
EN60335-1, EN60335-2-29, EN61000-3-2, EN61000-3-3.
i overenstemmelse med direktivreglerne
98/37/EC, 73/23/EEC, 89/336/EEC, 2002/95/EC, 2002/96/EC
Fra 01-11-2006
ZWOLLE NL
J.A. Bakker - van Ingen J. Lodewijk
CEO Ferm BV Quality Manager Ferm Global
Det er vores hensigt til stadighed at forbedre vores produkter, og vi forbeholder os derfor
til enhver tid retten til at ændre produktspecifikationerne uden forudgående varsel.
Ferm BV • Lingenstraat 6 • 8028 PM Zwolle • Holland
GB
D
NL
F
E
P
I
S
FIN
N
DK
Ferm
Important safety notes on charger and batteryblok
If you come into contact with acid from the battery block, rinse it off with water
immediately. If acid gets into your eyes, rinse out your eyes at once with water
and contact a doctor immediately!
1. Read and note the operating instructions and safety notes for the charger and battery
block before use!
2. NB! Only use the charger and battery block that were supplied by the manufacturer -
otherwise you will risk an accident.
3. Protect the charger, battery block and power tool from moisture, e.g. rain or snow.
4. Always check that all cables are connected correctly before using the charger.
5. If you discover that a cable is damaged, you should not use the charger again. Have
the damaged cable replaced immediately.
6. When the charger is not in use, the mains plug should be removed from the power
socket. Do not pull out the plug by grasping the cable.
7. If the charger has been dropped or has otherwise been exposed to high mechanical
stresses, you should have it checked for damage by an authorised dealer before using
it again. Damaged parts should be repaired.
8. Exercise caution when handling the battery block and do not drop it or expose it to impacts.
9. Never attempt to repair the charger or battery block yourself. Repairs must always be
carried out by an authorised dealer - otherwise you risk an accident.
10. Before cleaning or servicing the charger or battery block, always pull the plug from the
charger socket.
11. Never charge the battery block when the ambient temperature is below 5 °C or above
40°C.
12. The air vents in the charger must never be blocked.
13. The battery block must not be short-circuited.
A short-circuit will cause a high current to flow. This may result in overheating,
the danger of fire or explosion of the battery block. This may damage the
battery block or the user may risk an accident.
Therefore:
• Do not connect any cables to the poles of the battery block.
• Take care that there are no metal objects (nails, paper clips, coins, etc.) on the
contact surface of the battery block.
• Do not expose the battery block to water or rain.
• Only use the battery block supplied in combination with this cordless
drill/screwdriver so as to avoid faults and/or risks to persons.
14. A damaged battery block or one that can no longer be charged must be disposed of
as special waste. Do not discard it with household waste.
15. Never throw the battery block onto a fire or into water. This will risk explosion!
6
GB
D
NL
F
E
P
I
S
FIN
N
DK
