BISCUIT JOINTER
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
& 3
TECHNICAL SPECIFICATIONS
PACKAGE CONTENTS
The package contains:
1 Biscuit Jointer
1Saw blade
1 Wrench
1 Adjustment plate
1 Allen wrench
1 Dust collection bag
1 Instruction manual
1 Safety instructions
1 Guarantee card
Check the machine, loose parts and accessories for
transport damage.
PRODUCT INFORMATION
Fig.A
The FBJ-710 Biscuit Jointer is suitable for cutting grooves
for biscuit dowel joints in solid wood, plywood,
chipboard, fibre board, plexiglass and artificial marble.
1. On/off switch
2. Auxiliary handle
3. Spindle lock
4. Angle stop
6. Scale for the fence angle
7. Cutting depth adjustment knob
8. Clamping lever for angle adjustment
9. Clamping lever for height adjustment
10. Knob for height adjustment
11. Scale for the height adjustment
12. Base plate
13. Dust bag connection
14. Dust bag
15. Motor base
SAFETY INSTRUCTIONS
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
ELECTRIC SAFETY
Always check that the power supply corresponds to
the voltage on the rating plate.
Your machine is double insulated in accordance
with EN 50144; therefore no earth wire is
required.
Replacing cables or plugs
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall socket.
Using extension cables
Only use an approved extension cable suitable for the
power input of the machine. The minimum cable size is
1.5 mm2. When using a cable reel always unwind the reel
completely.
SPECIAL SAFETY PRECAUTIONS
•Sawdust and splinters must not be removed while
the machine is running.
•Do not use cutting discs or circular saw blades in the
machine.
•Protect saw blades against shocks and impacts.
•Only use properly sharpened blades, otherwise
increased cutting forces will shatter the work piece.
•Before use, inspect the saw blade for any damage. Do
not use saw blades which are cracked, ripped or
otherwise damaged.
•Make sure that the work piece is sufficiently
supported or clamped. Keep your hands away from
the surface to be cut.
•Use the machine only with the auxiliary handle
•When saw blades have to be mounted on the thread
of the spindle, make sure that the spindle has
sufficient thread.
•Make sure that the saw blade has been mounted and
fastened properly. Do not use reducing rings or
adapters to make the saw blade fit properly.
•Apply the machine to the work piece only when the
machine is switched on.
•When working with the machine always hold the
machine firmly with both hands and provide for a
secure stance.
•Persons under 16 years of age are not permitted to
operate this machine.
Voltage | 230 V~
Frequency | 50 Hz
Power input | 710 W
No-load speed | 11000/min
Disc diameter | 100 mm
Blade bore diameter | 20+22 mm
Max. cutting depth | 18 mm
Fence adjustment | 0 - 90°
Spindle dimension | M10
Weight | 3.0 kg
Lpa (sound pressure) | 89.6 dB(A)
Lwa (sound power level) | 102.6 dB(A)
Vibration value | 1.9 m/s2
4Ferm Ferm 41
