Ferm 35
EXPLODED VIEW
Ferm Grinding machine
The following pictograms are used in these instructions for
use:
Denotes risk of personal injury, loss of life or da-
mage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine. Ma-
ke sure that you know how the machine functions and how
to operate it. Maintain the machine in accordance with the
instructions to make sure it functions properly. Keep this
manual and the enclosed documentation with the machi-
ne.
SAFETY INSTRUCTIONS
When using electric machines always observe the
safety regulations applicable in your country to redu-
ce the risk of fire, electric shock and personal injury.
Read the following safety instructions and also the
enclosed safety instructions.
BEFORE USING THE MACHINE:
1. Check the following:
- Make sure that your machine is correct for your po-
wer supply.
- Make sure the socket is earthed;
- Make sure the cable and socket are in good condi-
tion, i.e. not frayed or damaged.
2. Do not use long extension cables.
Use only earthed extension cables.
3. A grinding stone is fragile.
The stone is easily damaged when being dropped,
hit, etc. Always grind with the face of the grinding
stone, never the sides. A cracked grinding stone
must be replaced immediately. Due to the high ro-
tational velocity the stone might disintegrate, cau-
sing accidents.
4. Always wear safety glasses when grinding.
5. Never operate the grinding machine without the guard
in place.
6. Make sure the guard and the tool rest are properly ad-
justed and secured.
7. The maximum clearance between the tool rest and the
grinding stone must never exceed 1-1.5 mm.
8. Use the stone only for its intended purpose, e.g. for
grinding tools, never for heavy-duty construction
work.
Use only grinding stones that state the following:
- Name of the manufacturer;
- Binding material;
- Dimensions;
- Maximum speed.
9. Never rebore the arbor hole in the grinding stone to wi-
den the diameter.
10. The maximum admissable rotational velocity of the
grinding stone may not exceed the velocity mentioned
on the stone.
11. For safe grinding it is best to bolt the machine to the
bench.
BEFORE YOU OPERATE THE MACHINE:
1. Make sure the switch is “OFF” before you plug in the
machine.
2. Keep the cable away from moving parts.
IMMEDIATELY SWITCH OFF THE MACHINE WHEN:
• Interruption in the mains plug, mains lead or mains
lead damage.
• Defect switch.
• Smoke or stench of scorched isolation.
2 Ferm