763649
9
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
9
EN
3. After starting the engine, check to make sure
that the cutting attachment stops rotating
when the throttle is moved fully back to its
original position. If it continues to rotate even
after the throttle has been moved fully back,
turn off the engine and take the unit to your
authorized servicing dealer for repair.
Using the product
Cut only materials recommended by the
manufacturer. And use only for tasks
explained in the manual.
1. Grip the handles firmly with both hands using
your whole hand. Place your feet slightly apart
(slightly further apart than the width of your
shoulders) so that your weight is distributed
evenly across both legs, and always be sure to
maintain a steady, even posture while working.
2. Keep cutting attachment below waist level.
3. Maintain the speed of the engine at the level
required to perform cutting work, and never
raise the speed of the engine above the level
necessary.
4. If the unit start to shake or vibrate, turn off the
engine and check the whole unit. Do not use it
until the trouble has been properly corrected.
5. Keep all parts of your body away from rotating
cutting attachment and hot surfaces.
6. Never touch the muffler, spark plug, or other
metallic parts of the engine while the engine
is in operation or immediately after shutting
down the engine. Doing so could result in
serious burns or electrical shock.
If someone comes
1. Guard against hazardous situations at all
times. Warn adults to keep pets and children
away from the area. Be careful if you are
approached. Injury may result from flying
debris.
2. If someone calls out or otherwise interrupts
you while working, always be sure to turn off
the engine before turning around.
Maintenance
1. In order to maintain your product in proper
working order, perform the maintenance and
checking operations described in the manual
at regular intervals.
2. Always be sure to turn off the engine before
performing any maintenance or checking
procedures.
The metallic parts reach high temperatures
immediately after stopping the engine.
3. Under no circumstances should you ever
take apart the product or alter it in any way.
Doing so might result in the product becoming
damaged during operation or the product
becoming unable to operate properly
Handling fuel
1. The engine of the product is designed to
run on a mixed fuel which contains highly
flammable gasoline. Never store cans of fuel
or refill the tank of the unit in any place where
there is a boiler, stove, wood fire, electrical
sparks, welding sparks, or any other source of
heat or fire which might ignite the fuel.
2. Never smoke while operating the unit or
refilling its fuel tank.
3.
When refilling the tank, always turn off the engine
and allow it to cool down. Take a careful look
around to make sure that there are no sparks or
open flames anywhere nearby before refueling.
4. Wipe spilled fuel completely using a dry rag if
any fuel spillage occurs during refueling.
5. After refueling, screw the fuel cap back tightly
onto the fuel tank and then carry the unit to a
spot 10feet (3m) or more away from where it
was refueled before turning on the engine.
Transportation
1. When hand-carrying the product, cover over
the cutting part if necessary, lift up the product
and carry it paying attention to the blade.
2. Never transport the product over rough
roads over long distances by vehicle without
removing all fuel from the fuel tank. If doing so,
fuel might leak from the tank during transport.
2. MACHINE INFORMATION
Intended use
The brush cutter/string trimmer is only intended
for cutting grass, weeds, bush and other such
undergrowth, and should not be used for any
other purpose such as edging or hedge cutting as
this may cause injury.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ferm BCM1022 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ferm BCM1022 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info