763649
8
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
8
EN
Working area
There must not be any other persons in the
operating area. Also beware of children and of
animals. The user of the unit is responsible for
any accidents caused to other persons and/or
damage to their property. Remove all cut off parts
and other objects - danger of tripping.
Working circumstance
1. Never start the engine inside a closed room
or building. Exhaust gases contain dangerous
carbon monoxide.
2. Never use the product,
a. when the ground is slippery or when you
can’t maintain a steady posture.
b. At night, at times of heavy fog, or at any
other times when your field of vision might
be limited and it would be difficult to gain a
clear view of the working area.
c. During rain storms, during lightning storms,
at times of strong or gale-force winds, or at
any other times when weather conditions
might make it unsafe to use the product.
Working plan
1. You should never use the product when under
the influence of alcohol, when suffering from
exhaustion or lack of sleep, when suffering from
drowsiness as a result of having taken cold
medicine or at any other time when a possibility
exists that your judgment might be impaired
or that you might not be able to operate the
product properly and in a safe manner.
2. When planning your work schedule, allow
plenty of time to rest. Limit the amount of
time over which the product is to be used
continuously to somewhere around 30~40
minutes per session, and take 10~20 minutes
of rest between work sessions. Also try to keep
the total amount of work performed in a single
day under 2 hours or less.
Warnings
1. If you don’t observe the working time, or
working manner (see manual), Repetitive
Stress Injury (RSI) could occur. If you feel
discomfort, redness and swelling of your
fingers or any other part of your body, see a
doctor before getting worse.
2. To avoid noise complaints, in general, operate
product between 8a.m. and 5p.m. on weekdays
and 9a.m. to 5p.m. weekends. Check and
follow the local regulations as to sound level
and hours of operations for the product.
Before starting the engine
1. The area within a perimeter of 50 feet (15m)
of the person using the product should be
considered a hazardous area into which no
one should enter. If necessary, yellow warning
rope, warning signs should be placed around
the perimeter of the area. When work is
to be performed simultaneously by two or
more persons, care should also be taken to
constantly look around or otherwise check for
the presence and locations of other people
working so as to maintain a distance between
each person sufficient to ensure safety.
2. Check the condition of working area to avoid
any accident by hitting hidden obstacles such
as stumps, stones, cans, or broken grass.
Remove any obstacle before beginning
work.
3. Inspect the entire unit for loose fasteners and fuel
leakage. Make sure that the cutting attachment
is properly installed and securely fastened.
4. Be sure the debris guard is firmly attached in
place.
5. If the cutting head is the metal blade, use the
shoulder strap. Adjust the strap for comfort
before starting the engine. The strap should be
adjusted so the left hand can comfortably hold
the handlebar grip approximately waist high.
Starting the engine
1. Keep bystanders and animals at least 50feet
(15m) away from the operating point. If you are
approached, immediately stop the engine.
2. The product is equipped with a centrifugal
clutch mechanism, so the cutting attachment
begins to rotate as soon as the engine is started
by putting the throttle into the start position.
When starting the engine, place the product
onto the ground in a flat clear area and hold it
firmly in place so as to ensure that neither the
cutting part nor the throttle come into contact
with any obstacle when the engine starts.
Never place the throttle into the high
speed position when starting the engine.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ferm BCM1022 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ferm BCM1022 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info