764206
8
Verklein
Vergroot
Pagina terug
1/124
Pagina verder
8
EN
firmly with both hands and provide for a secure
stance.
• Alwaysdirectthecabletotherearawayfrom
the machine.
• Insertthemainsplugonlywhenthemachineis
switched off.
• Applythemachinetotheworkpieceonlywhen
switched on
Never use the machine for grinding
magnesium workpieces.
Switching on and off
• Thismachineisequippedwithasafetyswitch.
Switch ON
Use one finger to push the lock button forward
and then press the switch.
Switch OFF
Release the switch.
Before start working, the machine must
be run according to the max. speed.
Operation
• Holdthemachinefirmlyandmoveitagainst
the workpiece. Move the grinding disc evenly
across the workpiece.
• Movethemachineduringroughingunderan
angle of 30º - 40º across the workpiece (fig. 6).
Never use grinding discs for roughing!
• Themachinemustalwaysworkoppositeto
the direction of rotation. Therefore, never move
the machine in the other direction! Otherwise,
the danger exists of it being pushed
uncontrolled out of the cut (fig. 7).
• Inspectthegrindingdiscregularly.Worndiscs
have a negative effect on efficiency of the
machine. Replace the grinding disc on time.
• Donotputthemachinedownwhenthemotor
is still running. Do not place the machine on
a dusty surface. Dust particles may enter the
mechanism.
• Alwaysswitchoffthemachinefirstbefore
removing the plug from the wall socket.
Never use the spindle lock to stop the
motor.
5. SERVICE & MAINTENANCE
Make sure that the machine is not live
when carrying out maintenance work on
the motor.
The machines have been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper machine care and regular
cleaning.
Trouble shooting
Should the machine fail to function correctly, a
number of possible causes and the appropriate
solutions are given below:
1. Machine fails to operate
• Powerturnedoff.
• (Extension)cabledamaged.
2. The elektromotor hardly reaches maximum
speed
• Theextensioncableistoothinand/ortoolong.
• Themainsvoltageislowerthan230V.
3. Machine overheats
• Airventsareblocked.Cleanthemwithadry
cloth.
• Themachinehasbeenoverloaded.Usethe
machine for the purpose it is made for
4. Excessive sparking or elektromotor runs
irregular
• There’sdirtinsidethemotororthecarbon
brushes are worn.
• Replacethecarbonbrushesorbringthe
machine to a specialized repair centre.
Repairs and servicing should only be
carried out by a qualified technician or
service firm.
Cleaning
Keep the ventilation slots of the machine clean to
prevent overheating of the engine. Regularly clean
the machine housing with a soft cloth, preferably
after each use. Keep the ventilation slots free from
dust and dirt. If the dirt does not come off use a
soft cloth moistened with soapy water. Never use
solvents such as petrol, alcohol, ammonia water,
etc. These solvents may damage the plastic parts.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ferm AGM1081 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ferm AGM1081 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 14,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info