42 Ferm
ANGLE GRINDER
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
Read this operators guide carefully, before using
the machine. Ensure that you know how the
machine works, and how it should be operated. Maintain the
machine in accordance with the instructions, and make
certain that the machine functions correctly. Keep this
operator’s guide and other enclosed documentation with the
machine.
CONTENTS:
1. Machine data
2. Safety instructions
3. Assembly
4. Use
5. Service & maintenance
1. MACHINE DATA
INTRODUCTION
This machine is developed for grinding and roughing of
metal and stone. With help of the correct accessories
the machine can also be used for brushing and sanding.
TECHNICAL SPECIFICATION
PACKAGE CONTENTS
1Angle grinder
1 Wrench
1Auxiliary handle
1Safety glasses
3Dust masks
1Flexible steel rule 2 meter
1Spirit level
2Cutting discs stone 125mmx3.2x22.2mm
2Cutting discs metal: 125mmx3.2x22.2mm
1Diamond cutting disc 125mm open
1Diamond cutting disc 125mm closed
1Instruction manual
1Safety instructions
1Warranty card
FEATURES
Fig.1
1. ON/OFF-switch
2. Guard
3. Side handle
4. Grinding disc
5. Spindle lock
2. SAFETY INSTRUCTIONS
EXPLANATION OF SYMBOLS
In this manual and/or on the machine the following
symbols are used:
Read instructions carefully
In accordance with essential applicable safety
standards of European directives
Class II machine – Double insulation – You don’t
need any earthed plug.
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the mains
electricity in the case that the cord gets damaged
and during maintenance
Keep bystanders away
Risk of fire
Wear ear and eye protection
Wear protective gloves
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
SAFETY INSTRUCTIONS
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions. Keep these
instructions in a safe place!
•Check that the maximum speed indicated on the
grinding disc corresponds to the maximum speed of
the machine. The speed of the machine must not
exceed the value on the grinding disc.
•Make sure that the dimensions of the grinding disc
Voltage | 230 V~
Frequency | 50 Hz
Power input | 880 W
No-load speed | 11000/min
Disc diameter | 125 mm
Spindle dimension | M 14
Weight | 2,15 kg
Lpa (sound pressure) | 93,3 dB (A)
Lwa (sound power) | 106,3 dB (A)
Vibration value | 0,482 m/s2
Ferm 3
SPARE PARTS LIST FAG-125/880K
FERM NR DESCRIPTION REF NR
406847 OUTER FLANGE 1
406846 INNER FLANGE 3
407008 PROTECTIVE GUARD 7
406999 SPINDLE GEAR 15
406952 AUXILIARY HANDLE 22
407000 PINION GEAR 24
407004 ROTOR 26
407007 STATOR 32
407002 CARBON BRUSH (SET) 35
406814 SPANNER 49
406955 SWITCH 51
406956 SWITCH SLIDE 52
406957 SWITCH BUTTON 54
