wwwwww
..
ffeennddeerr..ccoomm
✧
wwwwww
..mmrrggeeaarrhheeaadd..nneett
20
Sine Chorus and Triangle Chorus
Stereo effects that add a “swirling” effect (sine) or “transparent” effect (triangle)
with delay modulation used to “thicken” a sound.
Sine Flange and Triangle Flange
Stereo effects with feedback that add a “whooshing” effect (sine) or a sharper
“phasing” effect (triangle) with delay modulation.
Amp Tremolo and Tremolo
Modulates volume of the input signal. Amp Tremolo is vintage Fender
Blackface amplifier tremolo and Tremolo is a sine-wave effect approximating a
grid–bias tremolo or the repeat percussion of a Tweed Tremolux.
DUTY CYCLE—Adjusts the high to low interval ratio of the signal volume. (Amp
Tremolo only)
TREMOLO SHAPE—Adjusts tremolo character from smooth to choppy.
TREMOLO OFFSET—Adjusts the oscillator center frequency from extreme to
gentle signal modulation. (Tremolo only)
Auto Pan
A sine-wave left-right panning effect. A low frequency oscillator sweeps the
signal back and forth in the stereo field.
PAN SHAPE—Adjusts the Auto Pan waveform from smooth to choppy.
Pedal Wah
A traditional foot-operated wah controlled with an expression pedal (optional).
For best results, the optimal expression pedal specifications include passive,
10k to 250k ohms.
WAH—Adjusts the wah filter center frequency.
HEEL / TOE FREQUENCY—Adjusts the minimum and maximum frequency
limits. Use to control the functional range of your pedal.
SWEEP TYPE—Select The Baby’s Cryin’ (modern wah) or The Real McQ
(vintage wah).
Touch Wah
Touch Wah is a dynamic wah that varies according to playing strength and
volume level.
SENSITIVITY—Adjusts the Touch Wah sensitivity to changes in volume.
MINIMUM / MAXIMUM FREQUENCY—Adjusts the Touch Wah frequency at low
and high playing volumes respectively. These settings can be reversed so that
low volumes will start with a high frequency wah that decreases when volume
increases.
SWEEP TYPE—Select Low Q (smooth wah) or High Q (extreme wah).
Vibratone
Rotating speaker effect based on the CBS-era Fender Vibratone speaker with a
2–speed rotating baffle.
VIBRO DOPPLER—Adjusts the Doppler shift (pitch change) of baffle rotation.
ROTOR SPEED 1, 2—Sets alternate rotor speeds selectable with the Reverb/FX
Bypass footswitch: Select Vibratone as the active effect, then use the AMP
button to access the Reverb/FX Bypass menu. Select Vibro Fast/Slow.
FX Edit Mode
