502531
5
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
LED & STATUS DISPLAY
Select “UP” or “DOWN” controls to adjust the
roller laminating temperature.
Manually adjust the roller temperatures to
suit the thickness of laminating stock.
Select function to laminate with ‘MOUNT BOARD’.
A function for laminating hard board more than 1mm
thickness. The function selects temperature 130°c and
motor speed “1”.
Select function to ‘MEASURE’ the actual
temperature of rollers.
The button can be pressed anytime for an im-
mediate read out in the temperature display.
Select function for ‘COLD’ or no-heat lamination.
Cold lamination automatically selects temperature and
motor speed of “0”. If roller temperature is above 60°c,
motor speed of “2” will operate until rollers have cooled
safely. This action will prevent heat damage to the
rollers.
Select function for laminating with ‘CARRIER’.
The function for laminating pouches with
Carriers. The function selects 100°c and motor
speed “2”.
Select function for ‘PRE-HEAT’ .
Pre-Heat can be selected as a ‘Stand-By’ function ideal
for extended periods of use. The function operates at
80°c and motor speed “2”, until another function is
selected.
Select function for ‘HOT’ lamination. Hot lamination for normal hot pouch films. For 80mic pouch, the machine will select
temperature of 90°c and motor speed of “5”. This is ideal for 80g copy paper and 80mic pouch. For thicker pouches, select the
corresponding engine speed followed by temperature adjustment. Adjustment to temperature using “UP” and “DN” buttons to
suit the thickness of paper as required.
EG:
250 micron = motor speed 2
200 micron = motor speed 3
175 micron = motor speed 3
150 micron = motor speed 3
125 micron = motor speed 5
100 micron = motor speed 5
80 micron = motor speed 5
5
Indicates roller temperature (pre-set and actual).
“READY” LED switches to show the roller temperature is
ready to laminate.
Indicates running speed of the rollers.
Function LED displays showing the selected function in
operation.
TEMPERATURE ADJUSTMENT & FUNCTION CONTROLS
SPEED & MOTOR CONTROLS
“STOP” function.
Press and hold to stop the rollers running. Do
not use for long periods especially when the
roller temperature is above 90°c.
“Reverse” function.
Press and hold to reverse the rollers. This will help
remove mis-fed pouches.
Select the motor speed to suit the chosen pouch thickness. Then adjust temperature to suit paper thickness if required.
EG:
motor speed 1 = mounting board
motor speed 2 = 250 micron & carriers
motor speed 3 = 200, 175, 150 micron
motor speed 5 = 125, 100, 80 micron
405600_EUR_Proteus_All_v1.5.indd 5 12/23/2010 1:50:33 PM
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fellowes Proteus laminator bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fellowes Proteus laminator in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info