485594
28
Verklein
Vergroot
Pagina terug
1/104
Pagina verder
14 What do I do, if ...
13.8 Cleaning the steam valve
... coffee-making is interrupted and
«REFILL WATER» is displayed?
The water tank is empty: Refill the
water tank and press the „OK“ key
(Fig. 3, g).
... coffee-making is interrupted and
the indications «CLEAN
BREWING UNIT» and
«SWITCH OFF UNIT» are shown
alternately?
Brewing unit is overfilled: Carefully
clean the brewing unit; see
„Cleaning the Coffee-making Unit“.
In powder mode spoon in a max. of 2
... the machine can no longer be
operated and «WASTE CONTAI-
NER» is indicated?
Container is full: Empty container
and clean thoroughly; see „Emptying
the Container“.
GB
In powder coffee mode, fill in max. 1
measuring spoon of coffee powder.
Adjust to a lower grinding level: see
“Changing grinding quantities”.
Check the ejection lever: see
Cleaning the brewing unit”
Clean the frothing unit as well as the
steam valve after frothing or heating
up milk. If the steam valve allows only
a reduced amount or no steam or hot
water to pass through, we recommend
decaling in addition.
Caution! Risk to health through milk
residue on the frothing unit and
steam valve! Contamination through
dried milk on the frothing unit as well
as the steam valve is a breading
ground for bacteria. Keep these parts
of the appliance clean at all times.
Caution! Risk of burning on the
frothing unit and steam valve! The
frothing unit as well as the steam valve
get very hot during the frothing
of milk or the preparation of hot water,
and can cause burns. Allow these
parts of the appliance to cool down
before starting cleaning. Only hold the
frothing unit by the black cap.
Method:
Remove the frothing unit and rinse off
the milk residue under flowing water.
Subsequently wipe the steam valve
with a damp cloth. Fig. 43
Clean the air suction opening of the
frothing unit if blocked by poking the
clogged opening carefully with a
pointed needle. Fig. 44
Now unscrew the outlet valve from the
steam valve. For this, use the measu-
ring spoon P with the integrated took
function. Fig. 45
Clean the outlet valve by poking the
clogged opening carefully with a
pointed needle.
Then rinse thoroughly and check that
the valve is free. Fig. 46
To clean the steam valve, place a
container under the steam valve. Turn
rotary switch D “Hot water/steam” into
position and allow hot water to pass
through briefly without the screwed-
on outlet valve. This rinses out any
remaining contamination from the
steam valve.
Now screw the cleaned outlet valve
back onto the steam valve using the
measuring spoon P. Fig. 47
Then again place the frothing unit
onto the steam valve and lock. Fig. 48
Caution, protection of the applian-
ce! A clogged steam valve can damage
the appliance! If the steam valve still
does not let through any steam or hot
water following cleaning of the outlet
valve, the device must be descaled.
Corresponding information can be
found in the chapter “Starting the
descaling programme”.
1.
2.
3.
4.
5.
6.
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fagor CAT 44NG bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fagor CAT 44NG in de taal/talen: Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 10,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info