485594
26
Verklein
Vergroot
Pagina terug
1/104
Pagina verder
During the cleaning process the display
shows the following indications alter-
nately:
•«CLEANING 1 <1-6>»:
The program carries out 5 cleaning
cycles. The pauses enable the cleaning
solution to take effect. The cleaning
cycles are counted off in the display.
•«IN PROCESS»
The bar indication in the bottom line
increases with the advance of the
pause duration.
In the event of a power failure or
interruption, the program must be
restarted!
The cleaning process takes ca.
8 minutes. Then the following is shown
in the display:
•«
EMPTY WASTE CONTAINER -
PRESS OK»
«WAIT»
Empty and replace the container. Then
press the „OK“ key (Fig. 3, g).
•«REFILL WATER – PRESS OK»
Remove the water tank, refill water
and replace. Then press the „OK“ key
(Fig. 3, g).
•«CLEANING COMPLETED»
When this message appears, the clean-
ing program is ended.
Turn the bean container to the desired
position. The machine is now ready for
use and in the status of the last
selected coffee mode.
After running the cleaning program,
you are advised to throw away the first
cup of coffee from the machine.
13.7 Running the descaling programme
GB
The descaling programme allows a
simple and effective descaling of the
appliance. You should descale the
appliance at regular intervals, latest,
however when you are informed by the
display indication “CARRY OUT DESCA-
LING“. The descaling process is carried
out in 2 phases, takes several minutes and
should not be interrupted.
The frequency of descaling depends on
how hard the water is in your region.
Please do not forget to find out the water
hardness and adjust the corresponding
hardness degree on the appliance. Please
read chapter “Determining and adjusting
the water hardness”.
Use only limescale removal products
recommendes by FAGOR. You may obtain
them from our authorised distributor
network or through our customer care
helpline.
Method phase 1: descaling
1. Press button f “Menu “. Subsequently
press button c “Scroll “ or button d “Scroll
“ until the menu point “DESCALE“ ppears.
2. Confirm the menu point with button g
“OK “. If you press button g “OK “ once
more you will receive instructions via the
display how you have to prepare the
descaling. Follow the instructions on
the display:
REFILL <250ml> WATER changes with 125ml
DESCALER IN WATERTANK – PRESS OK.
3. Pull out the water tank. Put 125ml
descaler agent into the water tank. Then
add 250ml water into the water tank by
filling the empty descaler bottle twice
with fresh water (see Illustration ). Replace
the water reservoir – press button g "ok “,
the descaling program starts. Fig. 34
«PUSH IN WASTE CONTAINER»
Replace the container.
«WAIT»
The brewing unit is positioned.
«WASTE CONTAINER UNDER OUTLET»
Place the waste container under the
outlet again.
«PRESS OK. CLEANING 6 <1-6>»
Rinsing phase.
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fagor CAT 44NG bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fagor CAT 44NG in de taal/talen: Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 10,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info