668835
39
Verklein
Vergroot
Pagina terug
1/55
Pagina verder
8 SAFETY and ALARMS
8.1
Safety devices
CAUTION: during operation, some parts of the stove (door, handle, ceramic parts) can
reach very high temperatures.
Remember to keep at the previously mentioned safe distance.
Be careful, use caution and always follow the instructions.
If during operations any part of the stove or the exhaust pipe leak smoke, immediately turn off
the stove without removing the power supply and ventilate the room. Then, once cooled down,
verify the reason for the leak and, if necessary, call service personnel.
The stove is equipped with several devices which intervene in order to ensure safe operation.
CAUTION: safety devices are designed to eliminate any risk of damage to persons, animals or
things, and tampering with or servicing by unauthorised personnel could compromise their safety.
Safety devices on the stove include the following:
8.1.1 Fume exhaust pressure sensor
This sensor is connected to the fume exhaust pressure duct. It controls internal pressure to the
duct, monitoring any occlusion of the chimney flue and allowing use of the stove in total safety.
When it activates
If proper operation conditions in the fume exhaust duct are altered (improper installation, the
presence of obstacles or impediments in the exhaust tube, negligent maintenance, adverse
weather conditions such as persistent wind, etc.), the pressure sensor (pressure gauge) stops
electrical power supply to the pellet feed screw, thus blocking pellet feeding to the brazier and
sending an alarm signal to the board.
The alarm can also be caused by clogging in the stove, by improper combustion or lack of annual
stove cleaning.
When the alarm goes off, the display shows the message "AL 8 – LOW PRESSURE”.
What to do
- Put the stove in stand-by by pressing the off button for a few seconds (4). (The acoustic alarm
stops).
- Wait and make sure that the combustion of pellets left in the brazier has been completed.
- Wait for the stove to cool down, then verify and remove the causes which caused the safety
devices to go off. Finally, after having cleaned the brazier, re-start the stove by pressing the
ON/OFF button (4).
In the event of a repeated alarm, call a service centre.
8.1.2 Boiler /structure temperature sensor
The stove is equipped with a manual reset bulb thermostat whose function is to preserve the
boiler, pellet tank and, consequently, the whole structure from excessive temperature changes.
When it activates
For hydro stoves, if the water boiler temperature reaches a threshold of 85°C, while for air stoves,
if the pellet loading tube reaches the threshold of 85°C.
In both situations, the thermostat interrupts electrical power to the feed screw, thus blocking pellet
feeding to the brazier and sending an alarm signal to the board.
The display will show the message “AL 7 – Thermal safety”.
What to do
- Put the stove in stand-by by pressing the off button for a few seconds (4). (The acoustic alarm
stops).
39

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Eva Calor Hydro Slim Kantina 16 kW bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Eva Calor Hydro Slim Kantina 16 kW in de taal/talen: Engels als bijlage per email.

De handleiding is 5,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info