1. Open the Eurom Smart App manual with the
QR code (Figure 19) or go to
www.eurom.nl/nl/manuals.
2. Complete the Eurom Smart App manual.
• When the device is connected with Wi-Fi, the
Wi-Fi symbol appears on the screen.
• If the Wi-Fi symbol is blinking there is no
connection.
Smart Timer
1. Create a schedule with days and times in the Eurom Smart App. Timer settings set in the
app:
• will be stored on the device;
• will not be visible on the device;
• will remain available if Wi-Fi disconnects;
• will remain available if the device is switched off or unplugged;
• can only be removed via the app.
2. Check the data in the app regularly.
AP mode
1. Verify that the heating indicator is not visible. The device should be ON but not heating.
2. Press and hold the Mode button. The Wi-Fi symbol will start blinking slowly and the Wi-Fi
connection is in AP mode.
Reset Wi-Fi connection
1. Verify that the heating indicator is not visible. The device should be ON but not heating.
2. Press and hold the Mode button. Existing connections will be deleted, the Wi-Fi symbol
will start blinking and a new connection will be made.
Switching on and off Wi-Fi connection
1. Verify that the heating indicator is not visible. The device should be ON but not heating.
2. Press and hold the ON/OFF button for three seconds to toggle between:
• Wi-Fi on - Wi-Fi indicator flashes;
• Wi-Fi off - no Wi-Fi indicator visible.
Wi-Fi thermostat ready (optional)
This device can be connected with the optional Wi-Fi thermostat. The temperature is
measured at the Wi-Fi thermostat instead of the device. This ensures an optimized comfort
