62
You can consult an elaborate Eurom Smart App user manual with the QR code
below:
or on the website: http://www.eurom.nl/nl/manuals
Safety measures
Tipping safeguard
The heater is equipped with a tipping safeguard which switches the heater off if it
accidentally falls over. It will start working again once it has been set upright.
but, before reusing, switch if off, unplug and check for damage. Do not use the heater if it
is damaged or malfunctioning, but have it inspected/repaired!
Overheating safeguard
In case of internal overheating, the overheating safeguard will switch the heater off. This
may occur if the heater cannot give off enough heat or if it cannot draw in enough fresh
air. As mentioned above, this is generally caused by (partially) covering the heater or
installing the heater too close to a wall or something similar. After cooling down, the
heater will automatically switch on again but if the cause has not been eliminated, this
could be repeated (with all of the corresponding risks) In case of overheating, switch off
the heater and unplug. Give the heater time to cool down, remove the source of the
overheating and use as normal. If the problem persists or if you have not been able to
trace the source of the overheating, turn the heater off immediately and unplug. Contact a
servicing point to have the heater repaired.
Cleaning and maintenance
Keep the heater clean. Deposits of dust and dirt in the appliance are a common cause of
overheating so these should be removed regularly. Switch off the heater, remove the plug
from the socket and allow the heater to cool down before cleaning or carrying out
maintenance work.
• Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not use
aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or chemical solutions!
• If the heater is hung on the wall, clean the back and the space behind the heater. Then
remove the heater from the wall, see ‘Installation’.
• Use a vacuum cleaner to carefully remove any dust and dirt from the grills and ensure
that the air intake and outlet openings are clean. Be careful not to touch or damage
any internal parts during cleaning!
• The heater contains no other parts which need maintenance.
