60
Working with the app via wifi
The heater can also be operated using an app on your smartphone. The heater
must be connected with a wifi modem. See the back of the booklet for
instructions on how to install the app. By activating the app on your smartphone
or tablet, and selecting the device, you can operate the heater with the
smartphone. You do not need to set a day or time as they are set automatically (both on
the app and on the display).
You can use the app to switch the device on and off, regulate the temperature and
capacity, set the ECO and the open-window detection setting. The app can also be used to
set 20 on and off settings daily, on the weekly timer.
If the device is connected with wifi and is switched on, the display will show (during screen
saver) the wifi symbol and ON. If the device is connected to wifi but switched off, the
display will show the wifi symbol and OFF.
Note: timer settings that are created using the app are not visible on the display; timer
settings that are created using the operating panel or remote control are not visible on the
app! Once there is a wifi connection, you cannot create a new weekly timer using the
panel or the remote control (WEEK and SET buttons are turned off); any existing, manually
entered weekly timer settings will remain active under wifi. Do not use both methods at
the same time!!!
When the heater has logged into wifi, an automatic connection will be made when it is
switched on. The wifi symbol will be on all the time. If the wifi symbol blinks quickly, there
is no connection. You can re-set the Wi-Fi settings or change from slow to fast blinking by
pressing the MODE button for several seconds. Existing connections will be deleted, the
wifi symbol will begin to blink and a new connection will be made.
You can switch off the wifi connection (and the blinking wifi symbol) by pressing and
holding the ON/OFF button. If you hear a long beep, the wifi is switched off; the wifi
symbol will go out. By pressing and holding the ON/OFF button, you will hear a short beep
to indicate that wifi is switched on again. The wifi symbol will come back on.
Warning! After switching the heater on or off, you will hear a quiet sound. This is normal
and no reason to worry. It is just the material expanding and shrinking during heating and
cool-down.
Wi-Fi and app operation
The heater can also be controlled with an App. To do this, the heater must be connected
to a WiFi modem.
