35
To switch Off the Wi-Fi function, press again 3 seconds simultaneously on the
and buttons of the appliance and the WiFi light will extinguish.
If the Wifi symbol on the device flashes slowly, press the Wifi key for 3
seconds.
4. For more information about the App and how to connect to the App, see
http://www.eurom.nl/nl/manuals.
Safety measures App
Safety and operating remotely
Your Eurom heater can be easily operated via the same WLAN, via another
WLAN, or via 3G or 4G mobile network. This enables you to operate the heater
remotely without directly supervising the heater. Be aware that also when you
operate the heater remotely, you have to observe all the safety measures
included in the user guide delivered with the appliance. Read and understand
these safety measures and make sure that you comply with all these measures
when operating remotely.
You can consult an extensive user guide for the Eurom Smart
App by using the website http://www.eurom.nl/nl/manuals or
the QR code below:
Take care! The heater stays hot for some time after use!
Safety features
1. Fall safety
The heater is equipped with a topple safeguard which switches the heater off if it
accidentally falls over. Once it is placed upright, it will begin to work again but you
must unplug and check the heater for damage before reusing. If you find damage
or the heater does not work correctly, do not use and have it checked or repaired!
2. Overheating safeguard
The overheating safeguard switches the heater off if it overheats internally. This
may occur if heater cannot release sufficient heat or cannot take in adequate fresh
air. Generally, this is due to (partial) coverage of the heater, blocking of the air
inlet/outlet grilles, installation too close to a wall, etc. If the device is sufficiently
cooled, it should restart operation but if you do not remove the root-cause, it will
probably switch off again. Regular overheating can lead to irreparable damage. In
the event of overheating, always unplug the heater and remove the plug from the
socket. Give the heater time to cool down, remove the cause of overheating and
put the heater back on again. If the problems continue or you cannot identify a