33
Remote control
a. ON/OFF
b. Heating capacity
c. ON/OFF control light
d. Oscillate / Swing
e. Lower temperature
f. Higher temperature
Installing and connecting
Remove all the packaging materials and keep out of children’s reach. After
removing the packaging, check whether the appliance shows any damage or
any signs of faults/defects/failures. Do not use the appliance in case of doubt,
but turn to your supplier for checking /replacing.
Remove the protective foil of the battery holder. See illustration for replacing
the battery.
Choose an appropriate spot for the appliance, taking into account all the
precautionary measures stated in the user guide.
Check whether the control button is on OFF (O).
Unwind the entire electric cable and push the plug into an appropriate 220-240V
socket. To prevent overload, check whether there is no other appliance
connected to the same group.
Operate the heater by setting the main switch to I (ON). The heater is now on
stand-by. The display and control light are now blue.
From now on, the heater can be operated manually, with the remote control or
with an App.
Operation
Operating using the panel on the heater (manually) and the remote control
1. Press the button to start the heater. The fan starts to work and the display
shows the ambient temperature.
2. Press on the button (on the remote control ) to change the mode:
