24
Please note: in case, the water tank has not been positioned well, the water full indicator keeps
burning. The equipment does not work
Please note: Do not remove the float from the reservoir. No
full reservoir signal will
then be given and water will be able to leak out of the tank
8. [ UP & DOWN ] buttons
You can use the UP and DOWN buttons to set the desired air
humidity, from 30% to 90% (intervals of 5%). Both displays will show the set air humidity for a
few seconds and then the current air humidity. Once the set level has been reached (+/- 2%),
the compressor will stop; the fan continues to run. The dehumidifier thus keeps the air in the
room moving and is therefore able to feel the humidity and to catch on again in time. If the air
humidity rises to 3% over the set value, the device will restart. Between stopping and then
restarting, the compressor will always apply a protection time of 3 minutes.
If you set the air humidity using the UP and DOWN buttons to ‘CO’, the device will carry on
working irrespective of the air humidity level in the room.
If you set the air humidity using the UP and DOWN buttons to ‘AU’, the device will constantly
maintain air humidity at a comfortable level. That being:
Room temperature < 5 °C: Device stops working
Room temperature between 5 and 20 °C: 60% air humidity
Room temperature between 20 and 27 °C: 55% air humidity
Room temperature < 27 °C: 50% air humidity
9. [ C° en % ] indicator lights
If both the UP and DOWN buttons are pressed simultaneously, both displays change from
showing the air humidity percentage to the temperature and then back again. The
corresponding indicator lights % or C light up.
10. [ MODE ] button. (The corresponding lights will go on)
DEH: Dehumidifier setting
FAN: the device will work like a ventilator. Compressor is switched off and the UP and
DOWN buttons cannot be used. The SPEED fan setting button can still be used.
LAUNDRY: (drying washing). In this setting, the device will continuously dehumidify with
high fan speed.
In this LAUNDRY setting, the SPEED (fan speed) button and the UP & DOWN
buttons can't be used.
