783789
19
Verklein
Vergroot
Pagina terug
1/160
Pagina verder
34 35
English English
Problems Solutions
You cannot control
RoboVac with Amazon
Alexa.
Check if there are any Internet connection problems.
Check whether you have installed the Amazon Alexa
app onto your smart device and enabled “EufyHome -
RoboVac” Skill in the Amazon Alexa app. For details, refer
to the “Smart Integrations” page in the EufyHome App.
Make sure you have a EufyHome account and that it is
connected to RoboVac.
Make sure you are using correct Alexa voice-commands.
You cannot control
RoboVac with the
Google Assistant.
Check if there are any Internet connection problems.
Check if you have installed the Google Home app onto
your smart device and initiated the “EufyHome” action
in the Google Home app. For details, refer to the “Smart
Integrations” page in the EufyHome App.
Check if you are using the proper commands when
talking to the Google Assistant. When making your
request, first say the wake words “Ok Google”.
Repeat your question. Speak clearly to the Google
Assistant.
Voice Alert
When RoboVac encounters a problem, the red indicator on RoboVac will flash and you
will hear the relevant voice prompts.
The voice prompts below are only for reference and may be changed slightly after
voice pack updates. Please follow the voice prompts you have heard to find the cause
and solution below.
Voice Prompt Cause and Solution
Error 1: Front bumper stuck
If the front bumper is stuck, gently push the bumper in
repeatedly to dislodge anything trapped inside. If there
is nothing there, try moving the device to a new area
and restart.
Error 2: Wheel stuck. Check
the wheel and move it to a
new position
Wheel may be stuck or trapped. Clear any obstacles
in the surrounding area and check the wheel for any
trapped dust. Move the device to a new position and
try again.
Error 3: Side brush stuck Side brush may be stuck. Please clean it and try again.
Voice Prompt Cause and Solution
Error 4: Rolling brush stuck.
Remove and clean the
rolling brush
Remove the rolling brush, roller joint, roller brush cover,
and suction inlet to clean it. Once cleaned, place the
items back into the device and try again.
Error 5: Device trapped.
Clear the surrounding area
Device is trapped. Clear any obstacles in the
surrounding area and try again.
Error 6: Device trapped.
Reposition the device near
the area where the problem
occurred
Device may be suspended in air. Move it to a new
position close to the original position and try again. If
the device is still unable to start, clean the edge sensor
and try again.
Error 7: Wheel suspended.
Please move the device to a
new position
Wheels may be suspended in air. Move the device to
a flat surface and a new position close to the original
position then try again.
Error 8: Low battery,
shutting down device.
Please charge your device
Low Battery; system will shut down. Charge the device
and try again.
Error 9: Magnetic Boundary
Strip detected. Move device
to a different area
Device is too close to a strong magnetic field or strip.
Move the device to a different area and try again.
Error 12: Right wall sensor
needs cleaning
Clean the right side wall sensor since it's covered in
dust.
Error 13: Device tilted.
Please put the device on a
flat surface to start
Device may be tilted. Put the device on a flat surface
and try again.
Error 14: Please insert dust
collector and filter.
Put the dust collector and filter back in and confirm
that they are in place. Then restart the device.
Error 17: Virtual Boundary
detected. Move device to a
different area
Device is too close to the virtual boundary. Move the
device to a new position and try again.
Error 18: Laser cover may
be stuck
Pressure sensor for laser cover is stuck. Move the
device to a new position and try again.
Error 19: Laser sensor may
be stuck
Laser ranging sensor is covered in dust. Clean it and
try again.
Error 20: Laser sensor may
be blocked
Laser sensor is blocked by:
An empty environment
Metal mirrors
Or other multi-reflection devices
Remove any obstacles and move the device to a
different area.
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Eufy RoboVac X8 - T2262 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Eufy RoboVac X8 - T2262 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Turks als bijlage per email.

De handleiding is 13.84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info