582327
10
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
10 457
i
gb
ISTRUZIONI PER L’USO
POSITIONING AND ISTALLATION
Mod. 2
Mod. 1
3
2
1
4
5
7
6
3
2
4
7
5
6
Reversibilità apertura porte
Tutti i modelli sono, predisposti per l’inversione dell’apertura delle porte, per un più
coordinato allineamento con l’arredo cucina. Per effettuare l’inversione delle porte, pro-
cedere nel seguente modo: dopo aver coricato il frigorifero dalla parte dello schienale,
usando appositi spessori per evitare lo schiacciamento del condensatore e il danneg-
giamento del gruppo compressore procedere nel modo seguente:
MODELLO 1
A. Smontare la cerniera (2) in modo di liberare la porta (3).
B. Svitare le due viti che fissano la cerniera intermedia (4) e liberare la portina (5).
C. Svitare il perno (6) e montarlo sulla cerniera sinistra.
D. Togliere, in ambedue le porte, le bussole e relativi tappi dai rispettivi fori e rimon-
tare il tutto sul lato opposto (bussole a sinistra, tappi a destra).
E. Quindi rimontare la porta superiore (5).
F. Fissare la cerniera intermedia (4) unitamente alla piastrina in plastica sottostante
dalla parte opposta per bloccare la portina.
G. Rimontare la porta invertendo la posizione della bussolina (7).
H. Montare la cerniera inferiore messa in dotazione per bloccare la porta.
MODELLO 2
A) Smontare la cerniera inferiore (1) in modo da liberare la porta. Smontare il perno
(4) e il piedino livellatore (2). Smontare la bussola (5) e rimontarla all’altro lato
della porta. Rimuovere il piedino livellatore (3) e rimontarlo sullo stesso foro del
lato opposto.
B) Svitare il perno superiore (6) e rimontarlo sulla cerniera opposta, smontare la
bussola (7) e rimontarla sull’altro lato.
C) Rimontare la porta.
D) Dopo aver opportunamente girato la cerniera (1 ) rimontare il perno (4), quindi
rimontare il piedino (2) nella stessa sede cerniera, dal quale e stato opportuna-
mente rimosso. Bloccare quindi la cerniera inferiore con le 2 viti.
REVERSING THE DOOR SWING
All the models are equipped with | reversible doors so the door opening can be changed
to match your kitchen furnishings. To change the door swing, proceed as follow: set the
refrigerator on its back on i the floor. | Protect the condenser and compressor unit from
being damaged by inserting spacers between the appliance and the floor
MODEL 1
A. Remove the hinge (2) and the door (3).
B. Remove the two screws which fasten the centre hinge (4) and remove the door (5).
C. Unscrew the pin (6) and mount it on the left hinge.
D. From both doors remove the bushings and relative caps and reinstall them on the
opposite side (bushings to the left, caps to the right). E Reinstall the top door (5). 6
F. Fasten the center hinge (4) together with the plastic shim underneath on the |
opposite side to hold the freezer door in place.
G. Reinstall the door When doing so, reverse the position of the bushing (7)
H. Install the bottom hinge in order to hold the door in place.
MODEL 2
A) Dismount the bottom hinge (1) to free the door. Dismount the pin (4) and the
levelling foot (2). Remove the bushing (5) and fit on the opposite side of the door.
Remove the levelling foot (3) and fit on the hole on the opposite side.
B) Unscrew the top pin (6) and fit on the hinge of the opposite side. Dismount the
bushing (7) and fit on the opposite side.
C) Remount the door
D) Turn the hinge (1), fit the pin (4) and the foot (29 in the same hinge housing i from
which it was previously removed Fix the bottom hinge using the 2 screws.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Eudora BDA Elin KIA34 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Eudora BDA Elin KIA34 in de taal/talen: Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 1,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info