27
26
Faults
Please check the following points which may solve the problem, before calling the service
department.
FOR THE FITTER
Sympton
The appliance does not work.
The lights do not light up.
The cooking zones are not
working, the message F0
appears.
The fan switches itself on.
The appliance stops suddenly.
The message F7 appears.
The lamps continue to flash
after switching on.
Fault codes F00 – F08 in the
display.
Cause
No power supply.
Ambient temperature too low
(5 °C) before the hob was
plugged in.
The appliance checks itself
after the loss of power.
Ventilator is not far enough
open.
Transistors overheated.
An unsuitable utensil is being
used.
Poor electrical connection.
A control is defective, dirty or
has an object lying on it.
Action
Check the electrical installation
(fuse(s), connection).
After installation, wait about ten
minutes. The messages stop
flashing and you can then use
the appliance.
The fan switches itself off.
Check ventilator openings at
front and back.
Press any control. The message
disappears. Restart at a lower
setting.
Use a suitable utensil.
Check if the cable is being
caught by the drawer. If it is,
have it changed by the installer.
Clean the appliance or have it
repaired. Do not place objects
on the control panel.
FAULTS
Disposal of packaging and
appliances
The packaging of the appliance is recyclable.
It is made up off:
■ cardboard
■ polyethylene
■ CFC free polystyrene (PS rigid foam)
Please dispose of these materials in a
responsible way in accordance with the
regulations of your local authority.
Your local authority will also be able to give
you information about disposing disused
household appliances in a responsible way.
Technical data
Model number IK 5600
Energy supply 230 V, 50 Hz
Connection 5600 Watt
The identification plate is attached to the base
of the appliance.
The connection cable is of the type Y and may
only be replaced by qualified service
personnel.
This appliance complies with the CE directives.
