675424
112
Verklein
Vergroot
Pagina terug
1/143
Pagina verder
Platen Height Error is displayed while
printing
o
Are you printing a job over the entire print
area that requires a large amount of ink?
When printing a job that requires a large amount of
ink, the printed surface may expand due to the
amount of ink and the height position sensor may be
triggered during printing even if the T-shirt has been
loaded correctly. If this happens, try placing the T-shirt
over the platen as shown in the following illustration.
If the sensor is triggered even if the T-shirt is loaded
using a frame as shown in the illustration above,
removing the frame may smooth out any creases or
slack in the printed surface and solve the problem.
Note that the following steps are necessary if you
remove the frame.
Reduce the width of the White ink in the printer's
Garment Creator software or in the RIP software,
so that the white under-base print does not
extend outside the image.
Be careful not to touch the T-shirt while printing
as it can easily move out of position.
o
Have you dried pre-treatment liquid
completely?
The print surface becomes wet and swells if the
pre-treatment liquid is not dried sufficiently before
printing, and it may trigger the height position sensor.
Check that the pre-treatment liquid is dry.
Areas not printed are stained with ink
o
Is the platen clean?
The platen's frame and the top plate may be stained.
Check the platen and clean it if necessary.
U “Clean the Platen without Grip Pad” on page 94
Even after cleaning the scale, a
cleaning message is displayed
o
Is there any dust or ink cleaner on the scale?
If dust or ink cleaner remain on the scale after wiping, a
cleaning message is displayed. Check that there is no
dust or ink cleaner remaining on the scale.
If this message appears on the LCD panel again,
contact your dealer or Epson Support.
The printer status and log are printed
over the edges of the paper
o
Are you printing with an M size (standard)
platen?
Depending on the paper size the print area may
extend beyond the edges of the paper if paper is
loaded on an optional platen. Load paper on the M
size (standard) platen, and then print.
U “Load the T-shirt (media)” on page 45
Printing is slow or stops half way
o
Is the head move direction set to
uni-directional?
Print Direction may be set to Uni-Direction (Low
Speed) in the Garment Creator software for the
printer. Try setting Print Direction to Bi-Direction
(High Speed) in the printer's Garment Creator
software.
When printing a job from the USB memory stick, Prt
Direction may be set to Uni-Directional on the
preview screen. Disable the Uni-Directional setting.
U “Printing from a USB Memory” on page 58
SC-F2100 Series User's Guide
Problem Solver
112
112

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Epson SC-F2100 - SURECOLOR bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Epson SC-F2100 - SURECOLOR in de taal/talen: Engels als bijlage per email.

De handleiding is 5,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Epson SC-F2100 - SURECOLOR

Epson SC-F2100 - SURECOLOR Gebruiksaanwijzing - Nederlands - 149 pagina's

Epson SC-F2100 - SURECOLOR Gebruiksaanwijzing - Deutsch - 158 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info