675424
110
Verklein
Vergroot
Pagina terug
1/143
Pagina verder
o
Clean the nozzle row for the White ink.
After storing for an extended period or after switching
to White ink, the density of White ink may become
weaker. Try running head cleaning for the nozzle row
for White ink using the Execute (Heavy) level. If this
still does not improve the results, contact the Epson
Support.
Vertical ruled lines are misaligned.
o
Is the print head misaligned?
The print head normally prints bi-directionally. Lines
may appear misaligned due to the misalignment of
the print head in bi-directional printing. Try Head
Alignment when vertical lines are misaligned.
U “Correcting the print misalignment” on page 82
If lines are misaligned even after performing Head
Alignment, try setting Print Direction to
Uni-Direction (Low Speed) in the printer's Garment
Creator software. To print a job from a USB memory
stick that has already been set to Bi-Direction (High
Speed), change to Uni-Directional on the preview
screen.
U “Printing from a USB Memory” on page 58
The printed surface is soiled
o
Is the suction cap clean?
The printed surface may be soiled from dripping ink if
lumps of ink or lint are stuck around the suction cap.
Clean the suction cap.
U “Cleaning the Suction Cap” on page 66
o
Is there any lint or standing fibers on the print
surface?
Lint or standing fibers on the print surface may stick to
the print head and stain other areas of the T-shirt.
R emove any l int with the stick y t ape or rolle r and pre ss
the fibers flat with a hard roller when you load a T-shirt
on the platen.
U “Load the T-shirt (media)” on page 45
o
Clean around the print head.
If the printing surface and so on is dirty even after
performing cap cleaning, fibers, such as lint, may have
accumulated around the print head nozzles. Clean
around the print head.
U “Cleaning around head” on page 71
Not enough or uneven whiteness
o
Are the print head nozzles clogged?
If the nozzles are clogged, nozzles do not fire ink and
the print quality declines. Print a nozzle check pattern.
U “Checking for clogged nozzles” on page 78
o
Have you shaken White ink cartridges?
Because the ink particles in White ink can sediment
easily, it needs to be shaken at the start of every
working day or every 20 hours (when a message is
displayed). Remove the cartridge and shake it.
U “Shaking and Replacing Ink Cartridges” on
page 83
o
Have you applied the pre-treatment liquid
evenly?
If the pre-treatment liquid is not applied evenly, the
printed result will be uneven. Refer to the instructions
and apply the pre-treatment liquid evenly.
U “Using Pre-treatment Liquid” on page 31
o
Have you dried the T-shirt completely after
pre-treatment?
If the T-shirt is in the following condition, whiteness
may decline.
Insufficient heat press process
Moisture has accumulated because the T-shirt
was left for an extended period of time
Dry the T-shirt completely after the pre-treatment
referring to the fixation conditions. If the T-shirt is left
for an extended period, dry it for several seconds in
the heat press before printing.
U “Fixating the Pre-treatment Liquid (Heat Press)”
on page 35
SC-F2100 Series User's Guide
Problem Solver
110
110

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Epson SC-F2100 - SURECOLOR bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Epson SC-F2100 - SURECOLOR in de taal/talen: Engels als bijlage per email.

De handleiding is 5,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Epson SC-F2100 - SURECOLOR

Epson SC-F2100 - SURECOLOR Gebruiksaanwijzing - Nederlands - 149 pagina's

Epson SC-F2100 - SURECOLOR Gebruiksaanwijzing - Deutsch - 158 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info