Package contents Page 15
Introduction Page 15
Intended use Page 16
Specifications Page 16
Safety guidelines Page 16
Installation Page 17
Operation – the charger Page 18
Maintenance Page 18
Environmental protection Page 19
Battery APP Page 20
Installation – APP software Page 20
Qte Description
1 10Ah LiFePO4 Battery
1 Fixation bracket
1 Lithium battery charger
4 Screw M3.5x18
2 Bolt M8x12
2 Washer M8
2 Springwasher M8
2 Battery terminal connector Ø 8mm
2 Isolation cap M8
2 Battery terminal isolation cap
2 DIN battery pole + (thick) and – (thin)
2 Allen bolt M8x15
1 Instruction manual
Thank you for choosing the ENDURO® LI1210 LiFePO4 Battery. This has been produced
according to very high standards and has undergone careful quality control procedures.
This ENDURO® LI1210 battery is built using the latest Lithium Iron Phosphate (LiFePO4)
technologies. It has an extreme long lifetime up to 1500 times charging and discharging
cycle (at full discharge). The battery has a high power density and comes including a
special battery charger. This is a complete maintenance free product and there is no
leakage possible (with proper use).
This ENDURO® LI1210 LiFePO4 battery has a build in BMS (Battery Management System).
This system has two functions:
Monitoring and protection for over-discharge of each cell (16pcs totally).
Balancing the cell voltages during charging. With all lithium-ion based batteries,
balancing is required for proper battery function, otherwise, some cells will end up
"full" with others only "part-full".
This light weight battery is ideal for mounting in caravan, mobile home or boat.
Especially for the use in caravans with manoeuvring systems this battery is extremely
suitable as 12V power supply. In combination with an ENDURO® manoeuvring system this
battery stands for at least 15 minutes careless manoeuvring.
Before proceeding with installation and using this battery, please read
this manual very carefully and be aware of all the safety instructions!