6 | ENGLISH
1. On the e-Centre webpage, click on ‘Alarm Settings’ in the menu on the left hand
side.
2. Click on the edit button next to the Smoke-/Gas alarm.
3. Select one or more smoke sensors for this smoke alarm.
4. Alarm Events: You can use a scene to be triggered upon the detection of smoke.
When one or more smoke sensors detect smoke, the selected scene will be
triggered. For example, if you have defined a scene called ‘All On’ which
switches all lamps on in your house, you will be able to find your way out of your
house once the sensor detects smoke.
5. Siren Settings: The e-Centre has a siren function with several sounds and
settings you can change.
a. Siren Sound: Select one of the 5 sounds to be played by the e-Centre
once this alarm is triggered.
b. Siren Sound Duration: Change this setting if you want to have the siren
to go off a longer or shorter period (in minutes).
c. Maximum number of Siren Count: The number of times the siren
should go off.
6. Portal Settings: Enable this option if you want to send a signal to the e-Domotica
Portal once a smoke alarm is detected. This allows you to notify yourself and/or
contact persons about the smoke alarm.
This option is only possible if your e-Centre is connected to the internet and
registered on the portal.
7. Click ‘Save’ to save the settings. You will return to the previous page
automatically
Note! If you use a gas detector: Executing a scène to switch on appliances and
lighting may cause a spark and explosion hazard. Therefore it is not recommended to
switch lighting or devices when both smoke and gas detectors are used.
5.0 Setup your personal smoke alarm system
using the e-Domotica Portal.
The EM6590 Smoke Sensor can be used with the e-Domotica Portal. This allows you
to notify yourself and other contact persons, upon the event of smoke or fire.
This option is only possible if your e-Centre is connected to the internet and registered
on the portal. Also, you need to have added at least one (1) contact person for
reference.
1. Log in to the e-Domotica portal with your username and password.
2. Click in the menu on the left hand side on the option ‘Alarm setup’.
3. Click on the “Change” button ( ) at the right hand-side of the smoke alarm.
4. The following options appear: “Contact persons”, “Notifications” and “Assign
camera”. Refer to the following image:
