GB-13
9.3.4 Surround Speakers
Selection of Large or Small is same with that of front speaker. The speaker will have no signal output if set to
None.
Notes:
If the Subwoofer is on, Surround is set to None or Small, and bass from the surround
channels is redirected to the subwoofer. If the content contains a discrete subwoofer
channel, it is also sent to the subwoofer.
If the Subwoofer is Off, Surround is set to None or Small, and bass from the surround
channels is redirected to the left and right channels. If the content contains a discrete
subwoofer channel, it is discarded.
9.3.5 Subwoofer
Selecting to enable/disable the subwoofer output when 6 Channel analog output is used. The following
options are available:
None Subwoofer is off. Bass from center and surround channels is redirected to the left and right
channels. If the content contains a discrete subwoofer channel, it is discarded.
Present Subwoofer is on. Bass from center and surround channels is redirected to subwoofer.
If the content contains a discrete subwoofer channel, it is also sent to the subwoofer.
Note:
Bass Management is not available for MP3 or WMA bitstream ; therefore, it will be disabled during the
playback of those streams.
9.3.6 Test Tones
Selecting the Test Tone setting allows the user to test the player’s audio output on each
speaker. When you select channel, a short burst of pink noise will be sent to
corresponding channel
9.3.7 Center Delay
Selecting the Center Delay setting allows the user to enable/disable the center output delay.
9.3.8 Surr. Delay
Selecting the Surr. Delay setting allows the user to enable/disable the center output delay.
9.3.9 Digital output
Selecting the Digital Output setting allows the user to adjust the audio output on S/PDIF ports to work in
harmony with the audio equipment (e.g. receiver, speakers) connected to the player.
Off Digital audio output is disabled.
PCM Select this option when you are going to use stereo signals (2 channels). You should combine this
option with the option "Lower sampling rate," which we explain further on
All If you select this option the player will use the DVD's original audio track. Use this option when you
want to use the Dolby Digital AC3 signals through the optical or coaxial audio output.
9.4 RATING SETUP
Select Rating in the setup menu, and display the Rating submenu:
Note: Not all DVDs support ratings.
9.4.1 Parental Control
Selecting a Rating allows the user to set the parental control feature of the player
Select Parental Control, and press ENTER to change the different mode.
Note: Unlock the password before setting Parental Control
9.4.2 Set Password
Use the 0-9 keys to input four digits (password), then press ENTER to confirm.
Note: If you forget your password, please use the universal password 8888 to unlock.
9.5 MISC SETUP
Select MISC in the setup menu, and display the submenu:
* Use Default Settings
Reset setup data to factory default and re-load disc
