536726
9
Verklein
Vergroot
Pagina terug
1/62
Pagina verder
7
connecting to a telephone master or secondary
outlet.
7. Do not locate the Smart Home Box closer than 1m
to any large metallic object, (e.g. mirrors, radiators,
etc) as this may affect the radio range of the Smart
Home Box.
MOUNTING THE SMART HOME BOX
1. Undo the two captive fixing screws on top of the
panel and open the cover. The cover is hinged
along the bottom edge.
2. Unclip and remove the two back-up batteries on
upper and lower right hand side of the panel.
3. Route the cable from the Power Supply Unit up
behind along the cable track on the right hand side
of the Smart Home Box, and connect the plug to
the DC power socket in the panel. Ensuring that
the cable is not trapped between the panel and the
wall.
4. Use the fixing template provided (p.56) to mark
the position of two fixing holes on the wall.
Drill two holes, and insert the supplied plastic wall
plugs and then fit two screws into the wall plugs
until almost fully home. Hang the Smart Home
Box over these screws using the two keyhole slots
on either side of the top corners of the panel
casing.
5. Fix the Smart Home Box by inserting a fixing screw
into the lower fixing hole in the panel and tighten
the screw until it just grip the casing. Do not over
tighten the fixing screws as this could damage or
distort the casing.
6. Ensure that the ‘Reset (P1) and the ‘Hard-Wired
Siren tamper detect’ (P51) jumper links are set in
the OFF position.
7. Connect battery leads to both back-up batteries
and refit batteries.
Battery 1 (upper): Blue lead to +ve battery terminal
Black lead to ve battery
terminal
Battery 2 (lower): Red lead to +ve battery terminal
Blue lead to –ve battery terminal
IMPORTANT: Take care when connecting battery
leads to the batteries as connecting incorrectly
could damage the batteries or the Smart Home
Box.
Note: The Power LED may flash to indicate that
the unit is being operated from the back-up
batteries and that mains supply is not present.
8. If fitted, remove the plastic film covering the LCD
display and on the display window on the cover.
9. Close the lid of the Smart Home Box and tighten
the captive fixing screws.
10. Plug in and switch ON the Power Supply Unit, (the
Power LED should illuminate).
11. If required, connect the Smart Home Box to the
telephone line using the cable supplied by inserting
small RJ11 plug into socket marked LINE located
on the bottom edge of the Smart Home Box.
If the cable supplied is not long enough to reach a
suitable phone point then it will need extending
using a coupler and extension lead (not supplied).
Note: If the Tamper of Smart Home Box alarm
sounds during the installation reset the alarm by
pressing:
, ,
on the Smart Home Box Keypad.
Cable Track
Smart Home Box
Fixing Template
Fixing Hole
Keyhole Slots
9

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Elro-HIS20SF

Zoeken resetten

  • wij hebben een his20s alarmsysteem , volgens mij kon ik daar vroeger op inloggen ?
    kan iemand mij daar mee helpen
    marc Gesteld op 23-11-2023 om 16:54

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elro HIS20SF bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elro HIS20SF in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info