536726
8
Verklein
Vergroot
Pagina terug
1/62
Pagina verder
6
REMOTE CONTROL UNIT
A LED indicator F Key Chain Ring
B Fully Arm/Holiday Arm G Battery Cover
C Night Arm/Partial Arm H Negative Polarity
D Disarm I Positive Polarity
E Panic Switch
The Remote Control Unit is used to Fully Arm/Holiday
Arm, Night Arm/Partial Arm and Disarm the system.
The Remote Control also incorporates a Panic switch.
Activating the Panic switch will immediately initiate a
Full Alarm condition whether the system is Armed or
Disarmed, (unless the system is in Service, Test or
Program mode).
The Remote Control adopts a CR2032 type Lithium cell
which under normal conditions will have typical life in
excess of 1 year. Under normal battery conditions the
LED on the Remote control will only illuminate when a
button is pressed. However, under low battery
conditions this LED will flash every time the button is
pressed. When this occurs the batteries should be
replaced as soon as possible.
SETTING THE REMOTE CONTROL
1. Remove the rear cover by undoing the small screw
on the rear of the Remote Control.
2. Insert the battery ensuring that the +v terminal
faces upwards away from the PCB.
3. Replace the rear cover and fixing screw.
4. In order to communicate with the Smart Home Box,
the ID code of the Remote Control needs to be
learned by the Smart Home Box.
a. Set the Smart Home Box into ‘1. User Setup’
and press .
b. Select which administrator/user will carry the
remote control and press .
c. Select ‘:7 Remoterand press .
d. ‘7-1 LearningID’ will be shown and press
By pressing the , or on the Remote
Control will emit the ID code to the Smart Home
Box instantly.
SMART HOME BOX
LOCATING THE SMART HOME BOX
When choosing a suitable location for the Smart Home
Box, the following points should be considered.
1. The Smart Home Box should be located in a
position out of sight of potential intruders and in a
safe location, but easily accessible for system
operation.
2. The Smart Home Box should be mounted on a
sound flat surface to ensure that the rear tamper
switch on the Smart Home Box is closed when the
Panel is mounted. The Smart Home Box should
be mounted at a convenient height of between
1.3m and 1.5m and in a position where it will be
seen each day.
Note: If small children are in the household, a
further consideration should be given to keeping
the units out of their reach.
3. It is recommended that the Smart Home Box
should be positioned such that the Exit/Entry tone
(emitted by the Smart Home Box) can be heard
from outside the property.
4. The Smart Home Box should be mounted within a
protected area so that any intruder cannot reach
the Smart Home Box without opening a protected
door or passing through an area protected by a
PIR detector when the system is armed.
5. The Smart Home Box must be located within reach
of a mains socket.
6. If the telephone based functionality is to be used
then the Smart Home Box will need connecting to a
convenient telephone point.
Note: It is recommended that the telephone
connection lead is not extended beyond 5m before
8

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Elro-HIS20SF

Zoeken resetten

  • wij hebben een his20s alarmsysteem , volgens mij kon ik daar vroeger op inloggen ?
    kan iemand mij daar mee helpen
    marc Gesteld op 23-11-2023 om 16:54

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elro HIS20SF bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elro HIS20SF in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info