621095
9
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
- 17 -
The general operations are as follows:
▲▼◄►
Press these buttons to select the items. The display will scroll left/right if the selected item is not shown on the screen.
Numeric
Press these buttons to select the camera.
COPY ( )
Press this button to copy all the settings - excluding detailed Motion settings, Video Loss settings, Title/Audio - of the focus
camera to all the following cameras. (eg. focus camera is 1, its settings will be copied to those of cameras 2-4.)
ESC
Press this button to escape from this screen, and return to Setup Menu display. If the Save dialog is shown, press ENTER to
exit and save, ESC to exit without saving.
The following is a brief description for each item and its specifi
c operations:
Title The title (Max. 8 characters) of this camera. Please follow the Text Input method described in Section 4.1 to modify
this item.
Video Loss Settings.. used to setup the action settings when video loss is detected for this camera. Press ENTER in
Settings.. to call up Video Loss Setup display for the camera. Please refer to Section 6.2.1
for the details.
Motion Detection – whether the motion detection of this camera is enabled or not. Press ENTER or +/- to check/uncheck this
item. The default setting is ˇ
ˇˇ
ˇ - checked.
Motion Settings.. used to setup the motion settings for this camera. Press ENTER in Settings.. to call up Motion Setup
display for the camera. Please refer to Section 6.2.2
for the details.
Covert covert or not. If the camera is covert, the video of this camera can only be seen if the user has logged in as
Administrator. Press ENTER or +/- to check/uncheck this item. The default setting is “
- unchecked.
Call By Eventwhether to switch the call monitor to the video of this camera if certain event occurs for this camera. There
are 4 options, including Off, Motion, Alarm, Both (Motion & Alarm). Press +/- buttons to select one.
Dwell Time the dwell time if Call By Event is set to Motion, Alarm, or Both. Press +/- buttons to adjust the value (3-60
seconds, discrete).
Audio the AUDIO IN corresponding to this camera. If selected, the audio data for the selected AUDIO IN will be
recorded with the video data for this camera. Press +/- buttons to select none (N/A) or the AUDIO Inputs (1/2). The default
setting is “N/A”.
Record Quality the record quality for this camera. Press +/- buttons to select the value (1-9, with 1 the lowest (rough)
quality, 9 the highest (fine) quality).
Event Record IPS the IPS (Images Per Second) for this camera if certain event (Motion, Alarm) occurs for this camera.
This camera will be recorded at this rate for Post-record time since the event occurs. (Please refer to the following sections for
Post-record time.) Press +/- buttons to select the value (0 – 25 (PAL) / 30 (NTSC), discrete).
Pre-record IPS – the pre-record IPS for this camera if certain event (Video Loss, Motion, Alarm) occurs for this camera. This
camera is recorded at this rate for Pre-record time before the event occurs. (Please refer to the following sections for
Pre-record time.) Press +/- buttons to select the value (0 Event Record IPS for this camera, discrete). Please note that the
total Event Record IPS / Pre-record IPS should not exceed the system recording capacity (NTSC: 120/CIF, 60/Half-D1,
30/Full-D1; PAL: 100/CIF, 50/Half-D1, 25/Full-D1), or the system will lower the actual rate automatically at recording.
Normal Record IPS the normal record IPS for this camera. This camera will be recorded at this rate if no event occurs.
Press +/- buttons to select the value (0 – Pre-record IPS for this camera, discrete).
6
.2.1 Video Loss Setup
In Camera Setup, press E
NTER to call up Video Loss Setup of the selected camera as shown when the highlighted option is Video
Loss Settings of the camera to setup. The Video Loss Setup allows the administrator to define how the system responds to the
detected video loss for the camera.
The general operations are as
follows:
Press these buttons to select the items.
N
umeric
Press these buttons to select the camera.
- 18 -
C
OPY ( )
Press this button to copy the Video Loss settings of the focus camera to all the following cameras. (eg. focus camera is 1, its
Video Loss settings will be copied to those of cameras 2-4.)
ESC
Press this button to escape from this screen, and return to Camera Setup display. If the Save dialog is shown, press ENTER
to exit and save, ESC to exit without saving.
The following is a brief description for each item and its specific operations:
D
uration response duration to define at most how long (in seconds) the Alarm Out relay and the Buzzer will keep being
triggered after video loss is detected for this camera. However, the Alarm Out relay and the Buzzer will be reset immediately
once the camera returns to normal. Press +/- buttons to adjust the value (3-60 seconds, discrete).
Pre-record to define how long before video loss is detected this camera shall be intensively recorded at Pre-record IPS.
Press +/- buttons to adjust the value (0-10 seconds, discrete). Please note that the actual pre-record time may be shorter than
the value set if the total size of the pre-record pictures exceeds the pre-record buffer size of the system.
Alarm Out – to define which Alarm Output will be triggered when video loss of this camera is detected. Press +/- buttons to
select none (N/A) or one of the Alarm Outputs (1-2).
Buzzer – to activate the internal Buzzer or not when video loss of this camera is detected. Press ENTER or +/- to
check/uncheck this item. The default setting is “ˇ
ˇˇ
ˇ ” - checked.
Log – to log to event logs or not. Press ENTER or +/- to check/uncheck this item. The default setting isˇ
ˇˇ
ˇ ” - checked.
Screen Message to display the event message on the screen or not. Press ENTER or +/- to check/uncheck this item. The
default setting is “ˇ
ˇˇ
ˇ ” - checked.
E-mailto send the event e-mail to remote station or not. The e-mail will be sent to the predefined receivers at the moment
when the event is triggered. Press ENTER or +/- to check/uncheck this item. The default setting is “
” - unchecked.
6
.2.2 Motion Setup
In Camera Setup, press E
NTER to call up Motion Setup as shown when the highlighted option is Motion Settings.. of the camera
to setup. The Motion setup allows the administrator to define how the system responds to the detected motion for the camera.
The general operations are as f
ollows:
Press these buttons to select the items.
N
umeric
Press these buttons to select the camera.
COPY (
)
Press this button to copy the Motion settings, including Detection settings, of the focus camera to all the following cameras.
(eg. focus camera is 1, its Motion settings will be copied to those of cameras 2-4.)
E
SC
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elro DVR154S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elro DVR154S in de taal/talen: Engels als bijlage per email.

De handleiding is 1,54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Elro DVR154S

Elro DVR154S Gebruiksaanwijzing - Nederlands - 22 pagina's

Elro DVR154S Gebruiksaanwijzing - Deutsch - 24 pagina's

Elro DVR154S Gebruiksaanwijzing - Français - 19 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info