741402
14
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
14/40
STEP 4 - Configuring cameras (Skip if there are no cameras)
WARNING! Even if TC19 (80TC1U00133) and TC20 (80TC1V00133) cameras are
branded Elkron, they must be configured as “OTHER” cameras. For configuration, refer
to “STEP 5”.
1. Use the CDRom included in the camera package and insert it in your PC slot, then install the IP
Discovery software. Launch the application that will search for and display the cameras available
in the wired LAN (or WI-FI) network. Select and click on an IP address from the displayed list of
cameras, then press the CONNECT button. After establishing a connection with a camera, you
will be prompted to type a user name and password for that camera (factory username: admin,
Psw: admin). Then, the camera image will be displayed on the screen.
2. Together with the image, a menu will be shown from which to select the "Settings" "Network"
"General" items and then set the Static IP Netmask Gateway and (if they are known)
the network DNS, too. Save and exit the menu.
3. Enable the technical code on the control panel (factory setting 000000), and from the Master
Code, the "REMOTE ACCESS" option.
4. From your PC close down IP Discovery and open the application Hi-connect.
5. Select Manage Systems.
6. On the list of systems, select the concerned system and then Open to Manage.
7. Select the Web ServerTAB.
8. Check that the present connection mode is the required one (e.g. LAN (IT500WEB Local)
192.168.xxx.xxx:xxxx).
9. Select Connect.
10. After a connection is established, the green dot in the dialogue box will illuminate: select from the
displayed menu the item Cameras, by ticking the fields in the Hi-connect window, the
camera NUMBER, TYPE (Elkron/other) and ADDRESS (static IP or dynamic DHCP). Save
your settings by clicking the icon shaped like a "floppy disk".
11. The factory physical IP address of the cameras is 192.168.1.200.
12. Repeat the same setting procedure for all the other cameras concerned and/or present by setting
a different or suitable IP address.
13. After completing the procedure, save by clicking the "floppy disk" icon and then "TRANSFER".
14. At this point, the WEB server board will restart automatically reading "Restarting. Please wait".
15. Wait approximately 6 minutes for the reboot; at the end, the following confirmation message will
appear: Procedure correctly completed press OK.
Re-connecting will then be performed automatically; log out and close down Hi-connect.
16. Access the browser of your PC for connection to the Web server, open the web page, log in
(with the credentials of the Web Server board) and click on the item Video surveillance
Video cameras to check image viewing via the cameras connected to the system.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elkron IT500WEB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elkron IT500WEB in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 2,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info