741425
31
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
31/52 HPA800
There are no time constraints for the diagnostic phase: the signals on the LEDs and/or the horn remain active
for 10 minutes from the last variation, are then deactivated and remain in this condition until any input changes
status.
WARNING! Only during the diagnostic phase is it possible to change the configuration by means of dip-
switches.
3.2 PRE-ACTIVATION TIME
When all inputs are closed (alarm input, internal microswitch and anti-foam protection), the siren switches to pre-
activation phase. During this 30-second phase, the siren LEDs flash and the horn emits tones. As the 30-second
period approaches, the LEDs will flash faster for 3 seconds and the horn will emit a long tone indicating that the
siren is in operating condition.
WARNING! The siren only becomes operational if the internal tamper contacts (and anti-foam protection,
if present) are at rest, if there are no abnormalities with respect to the set selections and if the alarm input
ALL is at rest. If the ALL input is activated (or unbalanced), the siren sounds and the high-intensity alarm
flashes after the end of the pre-activation time.
The pre-activation time can be interrupted at any time by simply opening the siren cover or unbalancing
the alarm input. The siren will then return to diagnostic mode (see previous paragraph).
3.3 SYSTEM STATUS VARIATION SIGNALLING
The HPA800 siren displays the switching on and off of the system by means of the four central LEDs. It is also
possible to enable the on/off acoustic signal via the DIP B3.
If you do not want the siren to display the system variation on and off, simply do not connect terminal
TC to the alarm control panel.
To enable the system on/off tone, the DIP B3 must be set to OFF.
If the ON/OFF signals are enabled and the system is switched off or on during an alarm cycle, the on
(OFF>ON) and off (ON>OFF) notifications are presented at the end of the alarm cycle. If the switch-on
(OFF>ON) coincides with the activation of the ALL input, this will not be notified.
4 central LEDs
(high brightness)
Horn
(low volume)
System status variation
3 fast blinks
3 short tones
system on
(OFF>ON)
1 long flash
1 long tone
system off
(ON>OFF)
31

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elkron HPA800 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elkron HPA800 in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 3,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info