741458
69
Verklein
Vergroot
Pagina terug
1/248
Pagina verder
DS80TC1L-001 69
4.4.3 Focusing functions
The camera focus may be adjusted manually using the FOCUS +
and FOCUS – controls.
As the autofocus function is always on, a manual setting made using FOCUS + and FOCUS - will be kept only until a
pan, tilt or zoom command is used. In this case, autofocus will adjust focus automatically again.
Refer to the specific section for additional details on focusing and on the various options.
NOTE:
The autofocus function cannot work correctly in the following cases:
The object to be focused on it not in the middle of the image
There are far and near object in the frame
Bright light is shining on the subject
The subject is behind a glass pane covered in drops or dust.
The subject is moving very quickly.
The subject is not well lit.
The subject is too big.
4.4.4 Iris opening functions
The iris opening may be controlled manually using the IRIS
and IRIS- commands.
The manual setting made using IRIS+
and IRIS- will be kept only until a pan, tilt or zoom command is used if the
automatic iris opening option is enabled (the default setting is on). In this case, the opening will be controlling
automatically again.
Refer to the specific section for additional details on iris opening adjustment.
4.4.5 Preset positions programming and recalling
The ELKDome camera can store up to 200 panning, tilting and zooming configurations (called preset positions) which
can be recalled at any time.
The manual focusing and iris opening settings cannot be stored.
NOTE:
When saving presets, remember that, from 51 to 63, from 78 to 101 and from 171 to 186, the presets are reserved and
cannot be saved or used to position the camera.
The following examples show how to program the free presets and recall them.
Example: programming preset number 32
1. Position the camera in a certain pan, tilt and zoom configuration.
2. Enter the command PRESET
+ 32 + ENTER
3. The setting is saved and the message “Stored” appears.
From this moment onwards, simply enter the command CALL
+ 32 + ENTER to move the camera to the preset
position.
NOTE: The saved value will be written over if the setting is reprogrammed.
The presettings are saved in a permanent memory area of the camera where they are maintained also when power is
disconnected. However, restoring default settings will delete all preset values.
Caution. The presettings store the coordinates according to an angular reference system. Therefore, the reference
system zero point may become misaligned with the camera mechanics after prolonged use of the tilting and panning
functions. Minor inaccuracies in preset positions may occur. In this case, calibrate the angular coordinate system using
the {DOME RESET} command. This calibration is automatically run when the camera is switched on.
69

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elkron 80TC1L00133 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elkron 80TC1L00133 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 5,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info