741458
68
Verklein
Vergroot
Pagina terug
1/248
Pagina verder
DS80TC1L-001 68
4.4 CAMERA MOTIONS
After selecting a camera, it can be moved either directly using the control panel as described below.
Panning (horizontal) and tilting (vertical).
Zooming, focusing and iris opening.
Preset positions programming and recalling.
These functions can be directly accessed using a single key or joystick or a simple key combination.
4.4.1 Panning (horizontal) and tilting (vertical) functions
The camera may be moved using the joystick on the Ref. 80KP9200133. Move the joystick vertically to tilt the camera
and horizontally to pan it.
The maximum pan span is from 0 to 360 degrees with continuous rotation. The maximum tilt span is from -5 degrees
(camera in vertical position) to 92 degrees (-92 degrees if the -
2 TILT LIMIT option of the CONTROL OPTIONS) menu is
enabled.
The panning and tilting speed can be modulated by operating the joystick appropriately.
However, it should be remembered that the maximum speed of rotation that can be obtained using the joystick is not
always equal to that set in the control options. In fact, it depends on the values of the PROPORTIONAL SPEED and
SPEED LIMIT options (in the MOTION menu) and zoom. If the value of these options is ON, the maximum speed of
rotation that can be obtained with the joystick is reduced proportionally to the enlargement adopted in order to improve
framing.
Panning (horizontal)
Tip the joystick rightwards to turn the camera horizontally clockwise and tip it leftwards to turn it anticlockwise.
If no advanced options are set (e.g. range limits set and enabled), the camera can be turned continuously without
interruptions.
The pan span may be limited between two angles in FUNCTION PROGRAMMING • MOTION • LIMIT OPERATION.
Tilting (vertical)
Tip the joystick upwards to turn the camera vertically upwards and tip it downwards to turn the camera downwards. The
camera rotation is limited upwards by the horizontal plane or downwards by the vertical axis.
Performance will change considerably near the vertical axis according to whether the AUTO FLIP is on or not (default
setting is on).
With AUTO FLIP off, the camera will stop in perfectly vertical position and will stop turning when the joystick is
tipped downwards.
With AUTO FLIP on, the camera will proceed over the vertical axis when the joystick is tipped downwards.
This is because, when the vertical axis is reached, the camera flips automatically by 180 degrees and resumes
the initial trajectory.
The AUTO FLIP function can be used to follow a subject arriving in a certain direction passes under the camera and
continues in a straight line. To do this, hold the joystick tipped downwards following the movement of the subject.
Observe that in this case the joystick performance after the camera passes over the vertical axis opposite to the normal
axis because tipping the joystick downwards will turn the camera upwards.
Normal operation of the joystick will be resumed as soon as the downward tip is interrupted (also only for an instant). At
this point, to follow the subject in the same direction, you will need to tip the joystick upwards, as you would normally.
4.4.2 Zoom functions
The camera frame may be adjusted by using the ZOOM +
and ZOOM - commands. Use ZOOM + to zoom into the detail;
use ZOOM -
to zoom out.
Enlargement can be set choosing from the values of optical zoom X28 80TC1L00133 or X36 80TC9K00133.
For further details, refer to the specific section of control mode settings.
68

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elkron 80TC1L00133 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elkron 80TC1L00133 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 5,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info